Auto Configuration And Firmware Update - Snom m9 DECT Administrator's Manual

snom m9 DECT Administrator Guide
10. Click Open to select the file.
11. To begin the firmware update, click Download at the top of the Update Tool screen.
12. The update status is displayed on the handset.
Auto Configuration and Firmware Update
To administer a large pool of snom m9 devices, the device provides the option to configure settings and up-
grade device firmware with zero-touch interaction from the user. These mechanisms allow the administrator to
manage and monitor all snom m9 devices in the network remotely.
The snom m9 Auto Provisioning feature allows multiple devices to be configured and upgraded automatically in
parallel. Auto configuration is enabled by providing a settings server URL to the base station. This can be done
manually or via DHCP. Three files are required when using Auto Configuration. The required syntax structure
for each of the files is as follows:
Base file 000413231325.xml
Firmware file firmware-000413231325.xml
Settings file settings-000413231325.xml
An example of the base file (i.e., the provisioning URL) is shown below:
http://server.example.com/m9/000413231325.xml
The base file contains links to the firmware and settings files, as shown below:
32