Ipv6 And M9 Dect - Snom m9 DECT Administrator's Manual

snom m9 DECT Administrator Guide
Parameter
<user_ldap_
country_code>
<user_ldap_
area_code>
<user_ldap_
lookup_incom-
ing>
Table 4 Sample LDAP XML Configuration
<user_ldap_outgoing_phonebook idx="INDEX" perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_out-
going_phonebook>
<user_ldap_username perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_username>
<user_ldap_password perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_password>
<user_ldap_password perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_password>
<user_ldap_server_name perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_server_name>
<user_ldap_port perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_port>
<user_ldap_base perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_base>
<user_ldap_name_filter perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_name_filter>
<user_ldap_number_filter perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_number_filter>
<user_ldap_max_hits perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_max_hits>
<user_ldap_name_attributes perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_name_attributes>
<user_ldap_number_attributes perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_number_attributes>
<user_ldap_display_name perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_display_name>
<user_ldap_country_code perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_country_code>
<user_ldap_area_code perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_area_code>
<user_ldap_lookup_incoming perm="PERMISSIONFLAG">VALIDVALUE</user_ldap_lookup_incoming>

IPv6 and m9 DECT

IPv6 was developed by the Internet Engineering Task Force (IETF) during 1991–1997 to deal with the long-
anticipated IPv4 address exhaustion; however, the advantages of IPv6 exceed the increased address space
(from 32-bit to 128-bit). The primary advantages are detailed below:
42
Function/Description
Country code—This setting is used for speci-
fying standard country codes that are to be
substituted in LDAP search requests.
Area code—This setting is used for specifying
standard country codes that are to be substi-
tuted in LDAP search requests.
Lookup for incoming call—This setting can be
used to enable calling line identification us-
ing LDAP. When this setting is turned on, the
phone performs an LDAP number search for
the incoming number and displays the name of
the calling party accordingly.
Valid Value
Standard country
codes
Standard country
codes
<on>, <off>
Default
Blank
Blank
Blank