Snom m9 DECT Administrator's Manual page 48

snom m9 DECT Administrator Guide
Table 3 LDAP Parameters and Values
Parameter
<user_ldap_
outgoing_
phonebook>
<user_ldap_
username>
<user_ldap_
password>
<user_ldap_
password>
<user_ldap_
server_name>
<user_ldap_
port>
<user_ldap_
base>
<user_ldap_
name_filter>
40
Function/Description
Enable LDAP—If enabled, LDAP will be used;
otherwise, the normal vCard phone book will
be used.
Username—Here you can set a user name to
know what LDAP contacts are related to this
user.
Password—Here you can set a user password. Password string
Password repeat—Here you can set a user
password.
Server address—This setting refers to the
DNS name or IP address of the LDAP server.
Port—This setting specifies the LDAP server
port. In case the setting is not configured, the
default LDAP port (389) is taken.
Base—This setting specifies the LDAP search
base (the distinguished name of the search
base object) which corresponds to the loca-
tion in the directory from which the LDAP
search is requested to begin. The search
base narrows the search scope and de-
creases directory lookup time. If you have
multiple organizational units in your directory
(for example, OU=Sales in O=COMPANY
and OU=Development in O=COMPANY),
but the "OU=Sales" organization never uses
AOL AIM, you can restrict the lookup to only
the OU=Development subtree by providing
the following search base: OU=Development,
O=COMPANY.
Name filter—The LDAP name filter is the
search criteria for name look-ups. The format
of the search filter is compliant to the stan-
dard string representations of LDAP search
filters (RFC 2254). The name prefix for search
entered by the user is represented by the "%"
symbol in the filter.
Valid Value
<on>, <off>
String to be used
Password string
IP address or domain Blank
0-65535
String such as
the following:
o=UNIVERSITY
OF NEW
ORLEANS,c=US
Standard LDAP fil-
ters, e.g., (&(sn=%)
(telephoneNum-
ber=*))
Default
<off>
Blank
Blank
Blank
Blank
Blank
Blank