Finding The Ip Address Of The Base Station - Snom m9 DECT Administrator's Manual

2. Connect the 5V power converter to the wall outlet first, THEN to the base station.
Reset
button
The power indicator lights and the base station begins to initialize.
3. Once the base station has booted up, the Call LED on the face of the base station will begin blinking,
indicating that the base station is waiting for a handset registration.

Finding the IP Address of the Base Station

You can get the IP address of the base station either from the handset itself or via HTTP.
Handset
1. Press the center navigation button, followed by
The IP address of the base station is displayed on the screen. Make a note of it (image A below).
2. Using the bottom edge of the navigation wheel, page down twice. Make a note of the handset ID (im-
age B). Do not include the "h. "
Note: If DHCP failed, the IP address, netmask, and IP gateway of the base station will need to be
assigned from the handset. To apply the settings, the base must be rebooted. After reboot, the base
should be reachable at the IP address assigned through the handset.
RESET 5V DC NET
Net port
Power
connector
Finding the IP Address of the Base Station
g
System Info, then OK.
5