Snom m9 DECT Administrator's Manual page 18

snom m9 DECT Administrator Guide
4. Click Handsets, then select the handset ID from the Handset ID (IPUI) dropdown list. Click Save.
The user's name will be displayed on the phone display. This is considered the "idle display. "
5. Repeat these steps for each handset.
Note: Each handset can be assigned up to nine SIP accounts (identities). When there is only one
handset per account, that handset will use the same account for incoming and outgoing calls. When
one handset has been assigned to multiple accounts, the same handset will ring whenever a call comes
in on any of the SIP accounts for incoming calls. For outgoing calls, the user will need to select the
Outgoing SIP account by using the "Allow Line Switching" setting (shown below), which allows us-
ers to call numbers with an <index>*Number format (e.g., to call 499 from Identity 3, the user will dial
3*499).
10