Setting The Date And Time - Snom m9 DECT Administrator's Manual

Setting the Date and Time

It's critical that the handset shows the correct time so that incoming calls will show this and so that the alarm
clock can be used. While the system should automatically get its time from a time server, the time can also be
changed manually from the handset.
1. Press the center navigation button, followed by
2. Make the appropriate changes:
Time Server: If you have a local time server in your network or if you want to use some other public
time server, you can change the time server here. The default time server is pool.ntp.org. Your SIP
server may also act as a time server.
Timezone: To get the GMT offset for your region, open your computer's control panel and click Date
and Time (or go to dateandtime.com).
Format:
Date Format: Choose between two formats: Day, MM DD (Monday, Feb. 02) or
DD/MM/YYYY (02/02/2011).
Time Format: Choose between the 12-hour format (06:00 P.M.) and the 24-hour format (18:00).
Daylight Saving Time (DST)
Daylight Saving Time or DST is the practice of temporarily advancing clocks during summertime so that after-
noons have more daylight and mornings have less. The snom m9 also allows users to set up DST according to
their time zone and adjust DST shifts as needed. To set up DST:
1. Select Time/Language from the left navigation panel.
2. From the Time Zone dropdown, select Specify Details.
Setting the Date and Time
g
Date/Time.
49