Speed Dialing; Transferring Calls - Snom m9 DECT Administrator's Manual

Hide thumbs Also See for m9 DECT:

Table of Contents

snom m9 DECT Administrator Guide

Speed Dialing

This feature allows the m9 handset to perform single-digit dialing to SIP URIs or E164 numbers. This function

is particularly useful for phone users who dial certain numbers on a regular basis. Every SIP Identity provides

up to 10 speed dials for the handset.

To use the speed dialing feature of the snom m9, simply conﬁgure a number or SIP URI in one of the speed

dial entries. To place a call to the speed dial destination, simply dial the corresponding digit on the handset.

E.g., in the example shown below, the user would dial "1" on the handset to call sip:Rachel.Reed@snom.com

Note: SIP URIs used as speed dial destinations must be conﬁgured with a "sip:" preﬁx.

Note: Speed dials can be set up only through the web portal, so often the administrator is the one who sets

them up.

Call Transfer (Blind)

While connected, press Options to bring up the Options menu.

Select Transfer Call.

Table of Contents

Show Quick Links

Table of Contents