Conferencing - Snom m9 DECT Administrator's Manual

3. Enter transfer destination number, and press OK.
The handset performs the transfer and returns to idle mode.
Note: The function uses SIP REFER for Call Transfer.
Call Bridging (Attended Transfer)
1. While connected, press Options to bring up Options menu.
2. Select New Call.
3. Enter number and press OK.
4. When "Connected, press Options to bring up Options menu.
5. Select Bridge Calls.
The handset performs transfer and returns to idle mode. (The function uses SIP REFER for Attended
Transfer. Make sure your IPBX supports this.)
Note: Call Bridging can also be performed with the Hangup key by enabling the setting Identity >
Behavior > Transfer on Onhook.

Conferencing

1. While connected, press Options to bring up the Options menu.
2. Select New Call.
3. Enter number and press OK.
Conferencing
55