Call Forwarding - Snom m9 DECT Administrator's Manual

snom m9 DECT Administrator Guide
Changing Advisory Tones
Your handset uses advisory tones to inform you of different activities and statuses. You can activate/deactivate
the following advisory tones independently of each other. With the exception of the confirmation tone, the ring
tone and volume of all advisory tones can also be customized.
Key tones: Plays when a user presses the handset keys.
Charging tones: Plays when the phone is placed in the charger.
Low battery: Plays when the battery requires charging.
MWI: Plays when the user has voicemail.
Confirmation tone: Plays when the user selects an option on the handset, e.g., when changing the
language.
To change an advisory tone:
1. Press the center navigation button, followed by
2. Select a tone, then choose Select Tone and press OK.
3. Use the gf keys to select a volume.
4. Scroll down to Ringtone and use the gf keys to select a ringtone.
5. Press OK to save your settings.
Activating/Deactivating Auto Answer
When auto answer is activated, when you receive a call, you can simply lift the handset out of the charging
cradle without having to press the start key. If the handset is not in the cradle to begin with, the phone will au-
tomatically answer the call and become connected.
1. Press the center navigation button, followed by
2. Press OK to activate/deactivate (checkmark = on).

Call Forwarding

This setting activates call forwarding on the handset.
1. Press the center navigation button, followed by
2. Enter your PIN (default is 0000).
3. Choose from Never, Always, or Busy and click OK.
4. Select After timeout/sec., and specify a timeout (the default is 10 seconds). Click OK.
5. Select Fwd. target and enter the forwarding number. Click OK.
76
g g
Audio Settings
g
Auto Answer.
g
Call Forwarding.
Advisory Tones.