System Status - Snom m9 DECT Administrator's Manual

snom m9 DECT Administrator Guide

System Status

You can see what's going on in the system and with the handsets using the Status links in the left navigation
panel of the m9 web interface, as shown below (once logged into the base station).
Status of System
The Status link gives you the status of the network, including the IP address information. The registrations
show the registration status of each identity, and the DECT link shows the status of each DECT handset.
The system's information is also available from the handset:
1. Press the center navigation button, followed by
2. Page through the different screens using the bottom edge of the navigation wheel.
The Network page displays the MAC and IP addresses of the base station, the Gateway page displays
the firmware version, and the Handset page displays the identification number of the handset.
24
g g
Handset System Info.