While “Connected”, press Options to bring up “Options” menu Select Transfer Call Enter Transfer Destination and press “OK” Handset performs transfer and goes back to Idle mode Telephone User Guide – Snom M9 DECT IP phone...
Enter New Call Number and press “OK” When “Connected”, press Options to bring up Options menu Select Conference Handsets are all connected with each other and can send and receive audio Telephone User Guide – Snom M9 DECT IP phone...
Follow the prompts to save, listen to your message, or re-record your message. Intercom (DECT) Press left cursor or select “Intercom” from Menu Select Handset to call and press OK Telephone User Guide – Snom M9 DECT IP phone...
Note: Handset can be switched back to normal mode by pressing the "Green/Call" button Missed Calls Missed calls for each SIP Identity are relayed to its associated snom m9 Handset Telephone User Guide – Snom M9 DECT IP phone...
Keypad LED is switched off to save power Deactivate: Display turns off completely after 10 sec Keypad LED lights up intermittently Always: Displays stays on permanently (High battery consumption mode) Keypad LED stays lit Telephone User Guide – Snom M9 DECT IP phone...
Fault Reporting In the event of a fault call support on 01684 878060 or report via web ticketing system http://support.northway.net Telephone User Guide – Snom M9 DECT IP phone...
Need help?
Do you have a question about the M9 and is the answer not in the manual?
Questions and answers