Buell X1 2002 Service Manual page 423

HOME
3. Connect cables to frame and starter.
a. See Figure 7-30.
starter using nut with washer (metric). Tighten nut to
60-85 in-lbs (7-10 Nm).
b. See Figure 7-29.
below oil tank.
4. Apply light coat of petroleum jelly or corrosion-retardant
material to both battery terminals.
2002 Buell X1: Electrical
First, connect positive cable to
Attach negative cable to frame
6590
2
1
1. Nut with Washer (metric)
2. Positive Battery Cable
Figure 7-30. Positive Battery Cable
(Protective Boot Not Shown)
7-25