Buell X1 2002 Service Manual page 128

HOME
6855
Figure 2-93. Throttle Cable/Handlebar Routing
5. Route idle and throttle control cables.
a. See Figure 2-93.
from throttle control grip, forward of upper triple
clamp and to the left.
b. See Figure 2-94. Continue between the left side of
frame steering head and left frame tube. Cables
should be above and to the left of the D-shaped
washer behind the steering head.
c. See Figure 2-95. Route cables below the fuel tank
and continue downward.
6. Attach throttle cables to throttle body and adjust. See
1.20 THROTTLE CABLES.
See Figure 2-96. Attach throttle cable clamp to fer-
●
rules with screw (arrow on clamp points up).
7. Install air cleaner assembly. See
2-60
Cables must be routed forward
4.42 AIR CLEANER.
7058
Cables (behind wir-
ing harness)
Figure 2-94. Steering Neck Routing
6856
Figure 2-95. Throttle Body Routing
8204
Screw
Arrow (Up)
Figure 2-96. Throttle Cable Clamps
Throttle Cable
Clamps
2002 Buell X1: Chassis