Overland Storage SnapServer Administrator's Manual page 57

SnapServer GuardianOS 7.2 Administrator's Guide
5. At the second of two pages for Domain Filtering:
The default setting is import all groups and all users. To filter the groups or users,
enter just the ones to be imported. All others will be filtered out. If needed, groups and
users can be deleted by highlighting the name and clicking Delete.
a. In the left box, add any Domain Groups to be imported.
b. In the right box, add any Domain Users to be imported using pre-Windows 2000
6. Click Next to submit the domain filtering configuration.
7. At the confirmation page, click OK.
It may take a while for the changes to take effect.
10400317-003 05/2012
If you want to import only specific domain groups from the Active Directory
domain, enter those groups here. Sub-groups and users can be imported along with
the group by checking the appropriate box. They are noted by the addition of either
"S" (for sub-group) or "U" (for user) to the end of the group name.
names.
If you want to import specific domain users from the Active Directory domain,
enter those users here. They will be imported regardless of (and in addition to) any
domain groups specified.
NOTE: Users included in the Domain Groups list are not displayed in the Domain Users list
because they are imported implicitly.
©2010-12 Overland Storage, Inc.
Windows Networking (SMB)
 3-16