Enable/Disable Quotas - Overland Storage SnapServer Administrator's Manual

SnapServer GuardianOS 7.2 Administrator's Guide
From this page, you can:
• Enable/disable quotas on the volume by clicking the far left Enabled link (or the far
right Default Quota Limit if it exists).

Enable/Disable Quotas

When you click the Enabled status link (left-most column in the Quota table), a secondary
page is shown for managing the quota properties.
1. Check/uncheck the Enable Quotas box to enable/disable quotas.
2. Select one of the two default quota options to set the quota applied to users who do
not have individual quotas assigned to them.
10400317-003 05/2012
©2010-12 Overland Storage, Inc.
Quotas
 5-20