Dynamicraid Setup - Overland Storage SnapServer Administrator's Manual

SnapServer GuardianOS 7.2 Administrator's Guide Initial Setup Wizard

DynamicRAID Setup

Once DynamicRAID is selected, the wizard continues with the setup of the head unit. The
first step is to detect the installed disk drives.
Detecting Available Disks
Available disks are detected and displayed on the Detected Disks setup page. You will have
an opportunity to add more disks if empty slots exist.
Configure Storage – Head Unit
The next page lets you configure your head unit storage by choosing the parity mode and
snapshot pool size.
10400317-003 05/2012  2-6
©2010-12 Overland Storage, Inc.