Overland Storage SnapServer Administrator's Manual page 23

SnapServer GuardianOS 7.2 Administrator's Guide
General Configuration
Clicking Next on the Welcome page displays the General Information page of the Initial
Setup wizard. This page allows you to change the basic information for the SnapServer. It is
recommended that you set your Administrator password at this time to something other
than the default.
1. Enter (or accept) the Server Name.
The default server name is SNAPnnnnnnn, where nnnnnnn is the server number. If
desired, a unique server name of up to 15 alphanumeric characters can be used. In
addition to letters and numbers, you can also use a dash (-) between characters, but
spaces are not allowed.
2. Enter (or accept) the Date/Time Settings.
The SnapServer time stamp applies when recording server activity in the event log
(Monitor Menu), setting the create/modify time on a file, and when scheduling
snapshot, antivirus, or Snap Enterprise Data Replicator (EDR) operations. Edit the
settings according to local conditions.
NOTE: GuardianOS automatically adjusts for Daylight Saving Time, based on the selected time
3. Change the Administrator Password.
The default administrator user name is
To prevent unauthorized access to the SnapServer, enter a new secure password
immediately in the fields provided.
NOTE: Passwords consist of 1 to 15 alphanumeric characters and are case-sensitive.
4. To continue to the next page, click Next.
If you have changed the date, time, or time zone settings in the
window above, you may be prompted to log in again before continuing the setup.
10400317-003 05/2012
zone.
©2010-12 Overland Storage, Inc.
, and the default password is also
admin
Initial Setup Wizard
.
admin
General Configuration
 2-3