Snapcli Procedures; Snapcli Commands - Overland Storage SnapServer Administrator's Manual

SnapServer GuardianOS 7.2 Administrator's Guide
Command
web
Thus, the following command string:
web set require-webview-auth=yes non-secure-http=no
sets HTTP/HTTPs properties on the SnapServer to require clients to authenticate in order to
access the server and to disable non-secure HTTP access.

SnapCLI Procedures

Use these procedures to access and exit SnapCLI.
Logging into SnapCLI
1. Make sure your client has an SSH v2 client application installed.
NOTE: Free or low-cost SSH applications are available from the Internet.
2. Connect to the server using its name or IP address, and log in as admin (or any other
member of admingrp).
You will automatically be placed in the CLI shell.
NOTE: SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is
Exiting SnapCLI
To exit SnapCLI, type

SnapCLI Commands

The following table presents a list of the available SnapCLI commands and a brief
description of the function of each.
Command
activeusers
apple get
apple set
clear
date get
date set
10400317-003 05/2012
Arguments and Options
get
set
[OPTIONS]
- require-webview-
auth=(yes|no)
- non-secure-http=(yes|no)
configured to connect via SSH v2.
. The SSH session will close.
exit
Description
Display active users
Display apple network settings
Update apple network settings
Clear the page
Get the current date/timezone information
Set the current date/timezone information
©2010-12 Overland Storage, Inc.
SnapCLI Commands
Descriptions
- get WEB properties
- set WEB properties
- require HTTP/HTTPS
clients to authenticate
in order to access the
server
-enable/disable non-
secure HTTP access
 E-3