Date/Time - Overland Storage SnapServer Administrator's Manual

SnapServer GuardianOS 7.2 Administrator's Guide
Edit the following fields and click OK.

Date/Time

Use this page to configure date and time settings in ISO 8601 formatting. The time stamp
applies when recording server activity in the Event Log (Monitor tab), when creating or
modifying files, and when scheduling snapshot or antivirus operations.
CAUTION:
not automatically propagate to any scheduled events you have already set up for snapshot,
antivirus, or Snap EDR operations. These operations will continue to run based on the previous date
and time setting. To synchronize these operations with the new date and time settings, you must
reschedule each operation.
10400317-003 05/2012
Option Description
Server Name The default server name is SNAPnnnnnnn, where nnnnnnn is
your server number. For example, the default name for a
SnapServer with the serial number 1234567 would be
Snap1234567. If desired, enter a unique server name of up to 15
alphanumeric characters. In addition to letters and numbers, you
can also use a dash (–) between characters, but spaces are not
allowed.
NOTE:
Server Comment Optionally, add a comment (for example, server location) specific
to the server.
If the current date and time are reset to an earlier date and time, the change does
©2010-12 Overland Storage, Inc.
The server number can be found on the
System Status
page.
Server Options
Monitor >
 2-14