View Network Information - Overland Storage SnapServer Administrator's Manual

Hide thumbs Also See for SnapServer:
Table of Contents

Advertisement

SnapServer GuardianOS 7.2 Administrator's Guide

View Network Information

The Network > Information page displays the server's current network settings. One column
appears for each Ethernet port in use.
Field definitions are given in the following table:
10400317-003 05/2012
Ethernet Interface Information
Port Name
Enabled
TCP/IP Settings Obtained
From
IP Address
Subnet Mask
Primary WINS Server
Secondary WINS Servers
Ethernet Address
Speed Status
Duplex Status
Bonding Status
©2010-12 Overland Storage, Inc.
The name of the Ethernet interface.
Yes or No.
DHCP or Static.
The unique 32-bit value that identifies the server on a
network subnet.
Combines with the IP address to identify the subnet on
which the server is located.
The Windows Internet Naming Service server, which locates
network resources in a TCP/IP-based Windows network by
automatically configuring and maintaining the name and IP
address mapping tables.
Secondary Windows Internet Naming Service servers. Up to
three secondary servers can be used.
The unique six-digit hexadecimal (0-9, A-F) number that
identifies the Ethernet port.
10 Mbps, 100 Mbps, or 1000 Mbps.
Half-duplex: two-way data flow, only one way at a time.
Full-duplex: two-way data flow simultaneously.
Standalone, Load balance, Failover, Switch Trunking, or
Link Aggregation.
View Network Information
3-2

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SnapServer and is the answer not in the manual?

Table of Contents

Save PDF