Transferring A Call After A Speaker Call (Announcement) In A Group - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
US: Consult?
UK: Enquiry?
Program/Service
>
*
80=Speaker call?
>
Transfer?
Transferring a Call after a Speaker Call
(Announcement) in a Group
If this function has been configured (contact your ser-
vice personnel), you can use a speaker call (announce-
ment, ! Page 49) to announce a call in progress to a
group of users ! Page 97.
After a member of the group has accepted the call re-
quest, you can transfer the waiting party.
Precondition: You are conducting a call.
:
Confirm. The other party is placed on hold.
:
Press the key. The LED lights up.
:
Select and confirm.
or
qld
Enter the code.
o
Enter the group's station number.
s
Announce the call.
When a member of the group accepts the call
! Page 36, you are connected to this party.
t
Replace the handset.
or
:
Select and confirm
[1] "Different Displays (HiPath 4000 Environment)" ! Page 118
Making Calls – Convenience Functions
1
.
If the connection between the two other parties
is not established within 45 seconds, the call
from the first part returns to you (recall).
61