Accepting A Call For Another Member Of Your Team; Activating And Deactivating A Ringing Group - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
rle w
Accepting a Call for Another Member
of Your Team
You can accept calls for other telephones in your team
(group) from your telephone even while engaged in an-
other call. To do this, contact your service personnel to
find out if a group has been configured.
Precondition: You telephone rings briefly.
n
Lift the handset.
qik
Enter the code.
Activating and Deactivating a Ringing
Group
You can have calls for your telephone signaled audibly at
up to five other phones. The person who answers first
receives the call.
Saving telephones for the ringing group:
n
Lift the handset.
qle
Enter the code.
o w
Enter the internal station number.
Removing all telephones in call ringing group:
n
Lift the handset.
Enter the code.
If you deactivate the audible tone for another
group or trunk, or deactivate it for all groups and
trunks to which you belong, a special dial tone
sounds when you lift the handset.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! Page 60!
Using Team Functions
53