Table of Contents
Advertisement
CP50 Mobile Computer
BLUETOOTH ACTIVESYNC
The advantage of Bluetooth ActiveSync is to save the trouble perpetually switching between
multiple devices by changing cables or adapters.
Note to disable network bridging on your PC (specifically bridging to a Remote NDIS adapter)
before connecting Bluetooth ActiveSync. For more information on network bridging, see
Windows Help on the PC.
To use ActiveSync using Bluetooth:
1) Note the virtual Bluetooth COM port on your PC. If your PC doesn't have any, add one.
2) Run ActiveSync on your PC. From the menu bar, click File | Connection Settings.
3) Deselect Allow USB connection and select Allow connections to one of the
following.
4) Select the COM port you noted in step 1.
5) Hit OK button to apply change and quit setting.
6) On the mobile computer, tap ActiveSync
ActiveSync opens. If this is your first time opening it, it shows some guidelines to set up
sync, ignore whatever the screen says. Proceed as described in the following.
7) Tap the "Menu" command on
Option menu opens.
8) Tap Connect via Bluetooth.
st
For 1
setup, you are prompted to set up Bluetooth partnership with your PC,
9) Tap Yes.
You are taken to Bluetooth's Mode tabbed page.
10) Turn on Bluetooth if you haven't.
11) Tap Device tab.
Bluetooth's Device tabbed page open.
st
12) For the 1
setup, tap Add new device and complete through pairing and connection as
described in
Pair & Connect Bluetooth
OR
Select the name of your PC if it is connected before.
Once paired and/or connected, you are taken back to Device tabbed page.
13) Reopen ActiveSync
14) Tap the "Menu" command on Softkey bar.
Option menu opens.
15) Tap Connect via Bluetooth.
Bluetooth connection is established within a few seconds. ActiveSync on your PC opens
its Sync Setup Wizard.
16) Set up the sync partnership you desire. See
138
Softkey
bar.
device.
on the mobile computer.
1st USB Sync
from Start screen.
for the setting.
Reference Manual
Advertisement
Table of Contents
