Tilt Rod Assy. And Inner Cylinder Removal; Cylinder End Screw Inspection - Yamaha F100A Service Manual

BRKT
TILT ROD ASSY.
SERVICE POINTS
WARNING
To prevent the PTT fluid from spurting
out due to internal pressure, the outboard
should be kept fully tilted up (the tilt rod
at full length).
After removing the tilt motor or oil reser-
voir, do not push the tilt rod down. This
may cause hydraulic fluid to spurt out
from the port.
CAUTION:
Do not wipe hydraulic system components
with rags, paper, tissues, etc., because
their fibers may enter the hydraulic system
and cause malfunctions.

Tilt rod assy. and inner cylinder removal

1. Remove:
Outer cylinder end screw
Inner cylinder end screw
Tilt cylinder wrench:
YB-06175-2B/90890-06544

Cylinder end screw inspection

1. Inspection:
Cylinder end screw
O-ring
Backup ring
Dust seal
Damage → Replace.
7-27
E