Lantronix Data Center-Grade Evolution Device Server EDS32PR User Manual page 50

Line –
Configuration
Page Settings
Parity
Data Bits
Stop Bits
Flow Control
Xon char
Xoff char
EDS Device Servers User Guide
7: Network, Serial Line, and Tunnel Settings
Description
Select the parity used by the currently selected serial line.
Choices are:
None (default)
Even
Odd
Select the number of data bits used by the currently selected
serial line. Choices are:
7
8 (default)
Select the number of stop bits used by the currently selected
serial line. Choices are:
1 (default)
2
Select the flow control method used by the currently selected
serial line. Choices are:
None(default)
Hardware
Software
Character to use to initiate a flow of data.
When Flow Control is set to Software, specify Xon char. Prefix
a decimal character with \ or a hexadecimal character with 0x, or
provide a single printable character. The default Xon char is
0x11.
When Flow Control is set to Software, specify Xoff char. Prefix
a decimal character with \ or a hexadecimal character with 0x, or
provide a single printable character. The default Xoff char is
0x13.
50