Lantronix EDS32PR User Manual
  1. Manuals
  2. Brands
  3. Lantronix Manuals
  4. Server
  5. EDS32PR
  6. User manual

Lantronix EDS32PR User Manual

Eds device servers and terminal servers
Hide thumbs Also See for EDS32PR:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , User Manual
EDS Device Servers and
Terminal Servers

User Guide

EDS4100
EDS8PR
EDS16PR
EDS32PR
EDS8PS
EDS16PS
Part Number 900-433
Revision H May 2009

Advertisement

Table of Contents
loading

Related Manuals for Lantronix EDS32PR

Summary of Contents for Lantronix EDS32PR

  • Page 1: User Guide

    EDS Device Servers and Terminal Servers User Guide EDS4100 EDS8PR EDS16PR EDS32PR EDS8PS EDS16PS Part Number 900-433 Revision H May 2009...

  • Page 2: Copyright & Trademark

    Copyright & Trademark © 2009 Lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America.

  • Page 3: Table Of Contents

    Contents Copyright & Trademark....................2 Contacts ........................2 Disclaimer ........................2 Revision History ......................2 Figures ..........................9 1: Using This Guide Purpose and Audience....................11 Summary of Chapters ....................11 Additional Documentation ...................12 2: Introduction EDS8PS and EDS16PS Overview ................13 Features _______________________________________________________ 13 EDS4100 Overview.....................14 Features _______________________________________________________ 15 EDS8PR, EDS16PR, and EDS32PR Overview ............16 Features _______________________________________________________ 16 Protocols Supported ....................17...
  • Page 4 Contents Hardware Address _______________________________________________ 20 IP Address _____________________________________________________ 20 Port Numbers ___________________________________________________ 20 Product Information Label...................21 3: Installation of EDS8PS and EDS16PS Package Contents.......................22 User-Supplied Items ....................22 Identifying Hardware Components ................23 Serial Ports _____________________________________________________ 24 Console Port____________________________________________________ 24 Ethernet Port ___________________________________________________ 24 LEDs__________________________________________________________ 24 Reset Button____________________________________________________ 25 Installing the EDS8/16PS ...................25...
  • Page 5 Contents LEDs__________________________________________________________ 35 Reset Button____________________________________________________ 36 Installing the EDS8/16/32PR ..................36 Finding a Suitable Location ________________________________________ 36 Connecting the EDS8/16/32PR _____________________________________ 36 6: Using DeviceInstaller Accessing an EDS using DeviceInstaller..............38 Device Details Summary.....................39 7: Configuration Using Web Manager Accessing Web Manager through a Web Browser .............41 Web Manager Page Components ................43 Navigating the Web Manager ..................44 Device Status Page ....................46...
  • Page 6 Contents Login Connect Menu....................76 Preview the Login Connect Menu................76 10: Services Settings DNS Configuration ......................78 SNMP Configuration ....................78 FTP Configuration.......................80 TFTP Configuration.....................81 Syslog Configuration....................82 HTTP Configuration ....................83 HTTP Statistics__________________________________________________ 83 Change HTTP Configuration ..................85 HTTP Authentication....................87 RSS Settings.......................89 LPD Settings .......................90 LPD Statistics Page ______________________________________________ 90 LPD Configuration Page___________________________________________ 91 11: Security Settings...
  • Page 7 Contents MIB-II Statistics ________________________________________________ 111 IP Sockets ____________________________________________________ 112 Ping _________________________________________________________ 112 Traceroute ____________________________________________________ 113 DNS Lookup ___________________________________________________ 114 Memory_______________________________________________________ 115 Buffer Pools ___________________________________________________ 115 Processes_____________________________________________________ 117 Real Time Clock Page ....................119 System Configuration....................120 13: Advanced Settings Email Configuration....................121 Email Statistics _________________________________________________ 121 Email Configuration _____________________________________________ 123 Command Line Interface Settings ................124 Command Line Interface Statistics _________________________________ 124...
  • Page 8 Loading New Firmware .....................150 A: Technical Support B: Binary to Hexadecimal Conversions Converting Binary to Hexadecimal ................152 Conversion Table _______________________________________________ 152 Scientific Calculator _____________________________________________ 153 C: Lantronix Cables and Adapters D: Compliance Lithium Battery Notice....................157 Installationsanweisungen..................158 Rackmontage __________________________________________________ 158 Energiezufuhr __________________________________________________ 158 Erdung _______________________________________________________ 158 Installation Instructions .....................158...

  • Page 9: Figures

    Contents Figures Figure 2-1. EDS8PS Device Server......................13 Figure 2-2. EDS4100 4 Port Device Server..................15 Figure 2-3. EDS16PR Device Server ....................16 Figure 2-4. Sample Hardware Address ....................20 Figure 3-1. Front View of the EDS8PS ....................23 Figure 3-2. Back View of the EDS8PS ....................23 Figure 3-3.
  • Page 10 Contents Figure 11-2. SSH Server: Authorized Users..................95 Figure 11-3. SSH Client: Known Hosts....................96 Figure 11-4. SSH Client: Users......................97 Figure 11-5. SSL ...........................99 Figure 12-1. File system Statistics ......................103 Figure 12-2. File system Browser .......................104 Figure 12-3. TCP Protocol Page......................106 Figure 12-4. IP Protocol Page......................107 Figure 12-5.

  • Page 11: 1: Using This Guide

    Purpose and Audience This guide provides the information needed to configure, use, and update the EDS™ Device Server. The intended audience is users who will use the EDS to network- enable their serial devices. Summary of Chapters The remaining chapters in this guide include: Chapter Description 2.

  • Page 12: Additional Documentation

    Compliances according to ISO/IEC Guide 22 and EN 45014. E: Warranty Lantronix Warranty Policy link. Index Additional Documentation The following documents are available on the product CD and the Lantronix Web site (www.lantronix.com): Document Description EDS 8/16 Quick Information about the EDS hardware installation and initial Start configuration of your EDS8PS or EDS16PS.

  • Page 13: 2: Introduction

    This chapter introduces the Lantronix EDS family of device servers. It provides an overview of the products, lists their key features, and describes the applications for which they are suited. EDS is a unique, hybrid Ethernet terminal and multi-port device server product designed to remotely access and manage virtually all of your IT/networking equipment and servers.

  • Page 14: Eds4100 Overview

    RS-232 support. An RJ45 Ethernet port. 8 MB Flash memory. 32 MB random access memory (RAM). Lantronix Evolution OS™. A dedicated console port. AES, SSH, or SSL secure data encryption. Three convenient configuration methods (Web, command line, and XML). Print server functionality (LPR/LPD).

  • Page 15: Features

    One RJ45 Ethernet port. IEEE 802.3af standard for Power-over-Ethernet (PoE). 8 MB Flash memory. 32 MB Random Access Memory (RAM). Lantronix Evolution OS™. AES, SSH, or SSL secure data encryption. Three configuration methods (Web, command line, and XML). Print server functionality (LPR/LPD).

  • Page 16: Eds8Pr, Eds16Pr, And Eds32Pr Overview

    RS-232 support. One RJ45 Ethernet port. 8 MB Flash memory. 32 MB Random Access Memory (RAM). Lantronix Evolution OS™. A dedicated console port. AES, SSH, or SSL secure data encryption. Three configuration methods (Web, command line, and XML). Print server functionality (LPR/LPD).

  • Page 17: Protocols Supported

    TFTP, FTP, and HTTP for file upload. FTP and HTTP for firmware upgrade. Evolution OS™ EDS incorporates The Lantronix Evolution OS™. Key features include Built-in Web server for configuration and troubleshooting from Web-based browsers. CLI configurability. SNMP management.

  • Page 18: Snmp Management

    Moreover, the EDS cannot be used to bring down other devices on the network. You can use the EDS with the Lantronix Secure Com Port Redirector (SCPR) to encrypt COM port-based communications between PCs and virtually any electronic...

  • Page 19: Terminal Server/Device Management

    (See 6: Using DeviceInstaller on page 38.) Web Manager: Through a web browser, configure the EDS settings using the Lantronix Web Manager. (See 7: Configuration Using Web Manager on page 41.) Command Mode: There are two methods for accessing Command Mode (CLI): making a Telnet connection or connecting a terminal (or a PC running a terminal emulation program) to the unit serial port.

  • Page 20: Addresses And Port Numbers

    The hardware address is also referred to as the Ethernet address or MAC address. The first three bytes of the Ethernet address are fixed and read 00-20-4A, identifying the unit as a Lantronix product. The fourth, fifth, and sixth bytes are unique numbers assigned to each unit.

  • Page 21: Product Information Label

    2: Introduction Product Information Label The product information label on the bottom of the device contains the following information: Bar code Product ID (name) Product Revision Part number Hardware Address (MAC Address) EDS User Guide...

  • Page 22: 3: Installation Of Eds8Ps And Eds16Ps

    DTE adapter. To connect the EDS8/16PS serial port to a DCE device, you need a DCE (modem) cable, or an RJ45 patch cable and DTE adapter. For a list of the Lantronix cables and adapters you can use with the EDS8/16PS, see Appendix C: Lantronix Cables and Adapters.

  • Page 23: Identifying Hardware Components

    3: Installation of EDS8PS and EDS16PS Identifying Hardware Components Figure 3-1 shows the front of the EDS8PS. Figure 3-2 shows the back of the EDS8PS. Figure 3-1. Front View of the EDS8PS Figure 3-2. Back View of the EDS8PS The product information label on the bottom contains the following information: Bar code Serial number Product ID (name)

  • Page 24: Serial Ports

    3: Installation of EDS8PS and EDS16PS Serial Ports The EDS8PS has 8 serial ports and the EDS16PS has 16 serial ports on the back panel. All are configured as DTE and support up to 230,400 baud. Console Port The front panel of the EDS8/16/32PR provides an RJ45 Console port. It is an extra serial port configured as DTE and supports baud rates up to 230,400 baud.

  • Page 25: Reset Button

    1. Power off the serial devices. 2. Attach a CAT 5 serial cable between the EDS8/16PS and your serial device. See Appendix C: Lantronix Cables and Adapters, for a list of cables and adapters you can use. 3. Connect an Ethernet cable between the EDS8/16PS Ethernet port and your Ethernet network.

  • Page 26: Figure 3-4. Example Of Eds8/16Ps Connections

    3: Installation of EDS8PS and EDS16PS 4. Insert the power cord into the back of the EDS8/16PS. Plug the other end into an AC wall outlet. 5. Power up the serial devices. Figure 3-4. Example of EDS8/16PS Connections EDS User Guide...

  • Page 27: 4: Installation Of Eds4100

    This chapter describes how to install the EDS4100 device server. See EDS4100 Overview on page 14 for connection and protocol specifications. Package Contents Your EDS4100 package includes the following items: One EDS4100 device server. One DB9F-to-DB9Fnull modem cable. A CD that includes this User Guide, the Command Reference Guide, and the Quick Start Guide.

  • Page 28: Identifying Hardware Components

    4: Installation of EDS4100 Identifying Hardware Components The following two figures show the front and back of the EDS4100. Figure 4-1. Front View of the EDS4100 Figure 4-2. Back View of the EDS4100 The bottom of the EDS4100 (not shown) has a product information label. This label contains the following information: Bar code Serial number...

  • Page 29: Ethernet Port

    4: Installation of EDS4100 All four serial ports support RS-232 devices. See Figure 4-3 for pin assignments. Serial ports 1 and 3 also support RS-422 and RS-485 serial devices. See Figure 4-4 for pin assignments. All four serial ports are configured as DTE. Ports 1 &...

  • Page 30: Terminal Block Connector

    4: Installation of EDS4100 LED on the back of the EDS4100 shows the connection of the attached Ethernet network. The EDS4100 can be configured to operate at a fixed Ethernet speed and duplex mode (half- or full-duplex) or auto-negotiate the connection to the Ethernet network.

  • Page 31: Reset Button

    4: Installation of EDS4100 Description (green) network. Reset Button The reset button is on the back of the EDS4100, to the left of the power connector. Pressing this button reboots the EDS4100 and terminates all data activity occurring on the serial and Ethernet ports. Physically Installing the EDS4100 Finding a Suitable Location Place the EDS4100 on a flat horizontal or vertical surface.

  • Page 32: Figure 4-7. Example Of Eds4100 Connections

    4: Installation of EDS4100 Barrel power connector: The barrel power connector supports a power range of 9 to 30 VDC. Insert the round end of the supplied power cord into the barrel power connector on the back of the EDS4100. Plug the other end into an AC wall outlet.

  • Page 33: 5: Installation Of Eds8Pr, Eds16Pr, Or Eds32Pr

    DCE device, you need a DCE (modem) cable, or an RJ45 patch cable and DTE adapter. For a list of the Lantronix cables and adapters you can use with the EDS8/16/32PR, see Appendix C: Lantronix Cables and Adapters. An available connection to your Ethernet network and an Ethernet cable.

  • Page 34: Identifying Hardware Components

    5: Installation of EDS8PR, EDS16PR, or EDS32PR Identifying Hardware Components The following two figures show the components on the front and back of the EDS16PR. Figure 5-1. Front View of the EDS16PR Figure 5-2. Back View of the EDS16PR Product Label A product information label on the bottom contains the following information: Bar code Serial number...

  • Page 35: Console Port

    5: Installation of EDS8PR, EDS16PR, or EDS32PR The EDS16PR has 16 serial ports. The EDS32PR has 32 serial ports. Console Port The front panel has an RJ45 Console port. It is an extra serial port configured as DTE and supports up to 230,400 baud. Figure 5-3.

  • Page 36: Reset Button

    2. Attach a CAT 5 serial cable between the EDS8/16/32PR and your serial device. For a list of cables and adapters you can use with the EDS8/16/32PR, see Appendix C: Lantronix Cables and Adapters. 3. Connect an Ethernet cable between the EDS8/16/32PR Ethernet port and your Ethernet network.

  • Page 37: Figure 5-4. Example Of Eds16Pr Connections

    5: Installation of EDS8PR, EDS16PR, or EDS32PR Figure 5-4. Example of EDS16PR Connections EDS User Guide...

  • Page 38: 6: Using Deviceinstaller

    EDS using DeviceInstaller. Follow the instructions on the product CD to install and run DeviceInstaller. 1. Click Start All Programs Lantronix DeviceInstaller DeviceInstaller. 2. When DeviceInstaller starts, it will perform a network device search. To perform another search, click the “Search” button.

  • Page 39: Device Details Summary

    6: Using DeviceInstaller Device Details Summary Note: The settings in this table are Display Only unless otherwise noted. Current Settings Description Name Name identifying the EDS. Group Configurable field. Enter a group to categorize the EDS. Double-click the field, type in the value, and press Enter to complete.
  • Page 40 6: Using DeviceInstaller Current Settings Description Gateway Shows the IP address of the router of this network. There is no default. Number of Ports Shows the number of serial ports on this MarchPort Supports Configurable Shows False, indicating configurable pins are Pins available on the EDS.

  • Page 41: 7: Configuration Using Web Manager

    This chapter describes how to configure the EDS using Web Manager, the Lantronix browser-based configuration tool. The unit configuration is stored in nonvolatile memory and is retained without power. All changes take effect immediately, unless otherwise noted. Accessing Web Manager through a Web Browser Access the Web Manager: Select the Web Configuration tab on the DeviceInstaller window.

  • Page 42: Figure 7-1. The Eds Web Manager Status Home Page

    7: Configuration Using Web Manager Figure 7-1. The EDS Web Manager Status Home Page EDS User Guide...

  • Page 43: Web Manager Page Components

    7: Configuration Using Web Manager Web Manager Page Components Use Figure 7-2 to orient yourself to the areas of the EDS Web Manager page. Figure 7-2. Components of the Web Manager Page Header Links to subpages Menu Bar Configuration & Status Area Footer Information, instructions and Help The Orange Menu Bar always appears at the left of the page.

  • Page 44: Navigating The Web Manager

    7: Configuration Using Web Manager The Footer appears at the bottom of the page. It contains copyright information and a link to the Lantronix home page. Navigating the Web Manager The Web Manager provides an intuitive point-and-click interface. A menu bar at the left side of each page provides links you can click to navigate from one page to another.
  • Page 45 7: Configuration Using Web Manager Web Menu Description Link Page (RSS) settings. Lets you change the current Simple Network SNMP Management Protocol (SNMP) configuration settings. Lets you change the configuration settings for SSH server host keys, SSH server authorized users, SSH client known hosts, and SSH client users.

  • Page 46: Device Status Page

    7: Configuration Using Web Manager Device Status Page The Device Status page is the first page that appears when you log into the Web Manager. It also appears when you click the Status link in the menu bar. This read-only page shows EDS product information, network settings, line settings, and tunneling settings.

  • Page 47: 8: Network Settings

    8: Network Settings The Network Settings pages show the status of the Ethernet link and let you configure it on the EDS device. Network Settings Network 1 (eth0) Interface Status This page shows the status of the Ethernet network interface. View the network interface status: 1.

  • Page 48: Network 1 (Eth0) Interface Configuration

    8: Network Settings Figure 8-1. Network 1 (eth0) Interface Status Network 1 (eth0) Interface Configuration This page shows the configuration settings for the Ethernet connection and lets you change these settings. EDS User Guide...

  • Page 49: Figure 8-2. Network 1 (Eth0) Interface Configuration

    8: Network Settings View and configure network interface settings: 1. Click Network 1, Interface, and Configuration. The Network 1 (eth0) Interface Configuration page appears. Figure 8-2. Network 1 (eth0) Interface Configuration 2. Enter or modify the following settings: Network 1 Description Interface Configuration...
  • Page 50 8: Network Settings Network 1 Description Interface Configuration Page Settings DHCP Client Select On or Off. At boot up the EDS will attempt to lease an IP address from a DHCP server and maintain the lease at regular intervals. Note: Overrides BOOTP, the configured IP address, network mask, gateway, hostname, and domain.

  • Page 51: Network 1 Ethernet Link

    8: Network Settings Note: If DHCP or BOOTP fails, AutoIP intervenes and assigns an address. In this case, the static IP (if configured) is ignored. Network 1 Ethernet Link This page shows the current negotiated Ethernet settings and lets you change the speed and duplex settings.

  • Page 52: 9: Line, Tunnel, Terminal, And Host Settings

    Line Settings The Line Settings pages display the status and statistics for each of the serial lines (ports). They also let you change the character format and Command Mode settings for the serial lines. The following section describes the steps to view and configure Line settings. Line Statistics This read-only page shows the status and statistics for the serial line selected at the top of this page.

  • Page 53: Figure 9-2. Line N Configuration

    9: Line, Tunnel, Terminal, and Host Settings Configure Line n: 1. Click Line n and Configuration. The Line n Configuration page appears. Figure 9-2. Line n Configuration 2. Enter or modify the following settings: Line - Description Configuration Page Settings Name Enter a name for the line.
  • Page 54 9: Line, Tunnel, Terminal, and Host Settings Line - Description Configuration Page Settings default is None. Xon Char Specify the character to use to start the flow of data when Flow Control is set to Software. Prefix a decimal character with \ or a hexadecimal character with 0x, or provide a single printable character.

  • Page 55: Line Command Mode

    9: Line, Tunnel, Terminal, and Host Settings Line Command Mode Setting Command Mode enables the command line interface (CLI) on the serial line. Configure Line n Command Mode: 1. Click Line n and Command Mode. The Line n Command Mode page appears. Figure 9-3.
  • Page 56 9: Line, Tunnel, Terminal, and Host Settings Line - Description Command Mode Page Settings required delay. Binary = string of characters representing byte values where each hexadecimal byte value starts with \0x and each decimal byte value starts with \. Echo Serial Select Yes to enable echoing of the serial string at boot-up.

  • Page 57: Tunnel Settings

    9: Line, Tunnel, Terminal, and Host Settings Tunnel Settings The Tunnel pages allow you to view current statistics and configure serial settings, Connect Mode, Accept Mode, Disconnect Mode, Packing Mode, start and stop characters, modem emulation, and AES keys. View Tunnel – Statistics Click Tunnel on the menu bar then pick a tunnel from the drop down list.

  • Page 58: Accept Mode

    9: Line, Tunnel, Terminal, and Host Settings Accept Mode In Accept Mode, the EDS listens (waits) for incoming connections. Configure Accept Mode: 1. Click Tunnel n and Accept Mode at the top of the page. The Tunnel n Accept Mode page appears. Figure 9-5.
  • Page 59 9: Line, Tunnel, Terminal, and Host Settings 2. Enter or modify the following settings: Tunnel - Description Accept Mode Page Settings Mode Select the method used to start a tunnel in Accept mode. Choices are: Disabled = do not accept an incoming connection. Enabled = accept an incoming connection.

  • Page 60: Packing Mode

    9: Line, Tunnel, Terminal, and Host Settings Tunnel - Description Accept Mode Page Settings only alphanumeric characters and punctuation. When set, the password sent to the EDS must be terminated with one of the following: (a) 0x0A (LF), (b) 0x00, (c) 0x0D 0x0A (CR LF), or (d) 0x0D 0x00.

  • Page 61: Figure 9-6A. Tunnel N Packing Mode (Mode = Disable)

    9: Line, Tunnel, Terminal, and Host Settings Figure 9-6a. Tunnel n Packing Mode (Mode = Disable) Figure 9-7b. Tunnel n Packing Mode (Mode = Timeout) EDS User Guide...

  • Page 62: Figure 9-8C. Tunnel N Packing Mode (Mode = Send Character)

    9: Line, Tunnel, Terminal, and Host Settings Figure 9-8c. Tunnel n Packing Mode (Mode = Send Character) 2. Enter or modify the following settings: Tunnel - Packing Mode Description Page Settings Mode Select Disable to disable Packing Mode completely. Select Timeout to send data after the specified time has elapsed.

  • Page 63: Serial Settings

    9: Line, Tunnel, Terminal, and Host Settings Serial Settings This page allows you to view and change the settings for the tunnel selected. Configure serial settings: 1. Click Tunnel n and Serial Settings at the top of the page. The Tunnel n Serial Settings page appears.

  • Page 64: Connect Mode

    9: Line, Tunnel, Terminal, and Host Settings Connect Mode Connect mode defines how the unit makes an outgoing connection. Configure Connect Mode: 1. Select Tunnel n and Connect Mode at the top of the page. The Tunnel n Connect Mode page appears. Figure 9-10.
  • Page 65 9: Line, Tunnel, Terminal, and Host Settings 2. Enter or modify the following settings: Tunnel – Description Connect Mode Page Settings Mode The method to be used to connect to a remote host or device. Disabled = An outgoing connection is never attempted. (This is the default).
  • Page 66 9: Line, Tunnel, Terminal, and Host Settings Tunnel – Description Connect Mode Page Settings SSH Username Enter the SSH username. The tunnel uses the SSH keys associated with the client username. Block Serial Select On to block (not tunnel) serial data transmitted to Data the EDS.

  • Page 67: Modem Emulation

    9: Line, Tunnel, Terminal, and Host Settings Modem Emulation You can initiate a tunnel in Connect Mode using modem commands from the Serial Line. The modem emulation page enables you to configure the modem emulation settings when you select Modem Emulation as the Tunnel n or Tunnel 2 Connect Mode type. Configure modem emulation: 1.
  • Page 68 9: Line, Tunnel, Terminal, and Host Settings 2. Enter or modify the following settings: Tunnel- Modem Description Emulation Page Settings Echo Pluses Select Enabled to echo +++ when entering modem Command Mode. Echo Commands Select Enabled (same as modem command ATE1)to echo the modem commands to the console.

  • Page 69: Start And Stop Characters

    9: Line, Tunnel, Terminal, and Host Settings Start and Stop Characters The Start/Stop Chars page enables you to configure the EDS to start a tunnel when it receives a specific start character from the serial port and to disconnect upon receiving the stop character.

  • Page 70: Disconnect Mode

    9: Line, Tunnel, Terminal, and Host Settings Disconnect Mode Disconnect Mode is disabled by default. When enabled, Disconnect Mode runs in the background of an active connection to determine when a disconnection is required. Configure the tunnel Disconnect Mode: 1. Click Tunnel n and Disconnect Mode at the top of the page. The Tunnel n Disconnect Mode page appears.

  • Page 71: Aes Keys

    9: Line, Tunnel, Terminal, and Host Settings AES Keys Advanced Encryption Standard (AES) is an encryption algorithm for securing sensitive information by government agencies. Configure the AES keys for connect or Accept Mode: 1. Click Tunnel n and AES Keys. The Tunnel n AES Keys page appears. Figure 9-14.

  • Page 72: Terminal Settings

    9: Line, Tunnel, Terminal, and Host Settings Tunnel – AES Keys Description Page Settings starts with \0x and each decimal byte value starts with \. Decrypt Key Enter the value for each byte of the decrypt key. Select the format for the bytes as either Text or Binary. Connect Mode AES Keys Encrypt Key Enter the value for each byte.
  • Page 73 9: Line, Tunnel, Terminal, and Host Settings 2. Enter or modify the following settings: Terminal on Line Description Configuration Page Settings Terminal Type Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, “interpret as command.”...

  • Page 74: Network Terminal Configuration

    9: Line, Tunnel, Terminal, and Host Settings Network Terminal Configuration Configure menu features applicable to CLI access via the network: 1. Click Terminal on the menu then Network at the top of the page. Configuration is automatically selected. The Terminal on Network Configuration page appears. Figure 9-16.

  • Page 75: Host Configuration

    9: Line, Tunnel, Terminal, and Host Settings Terminal on Line Description Configuration Page Echo Applies only to Connect Mode Telnet connections, not to Accept Mode. Only disable Echo if your terminal echoes, in which case you will see double of each character typed.

  • Page 76: Login Connect Menu

    9: Line, Tunnel, Terminal, and Host Settings Host Page Description Settings Remote IP address for the host. Address Remote Port Port on the host to which the EDS will connect. 3. Click Submit. Login Connect Menu As an administrator, you can set up a menu on the EDS for terminal users. For a terminal attached to serial Line N, set as follows: Line[N] Protocol = None Line[N] Command Mode = Always...
  • Page 77 9: Line, Tunnel, Terminal, and Host Settings From the Web Manager, go to the Terminal page. If “Login Connect Menu” is enabled, you will see a preview layout in the lower part of the page. From the Command Line Interface, go to the config-terminal level. Use the “preview connect menu”...

  • Page 78: 10: Services Settings

    DNS Configuration This page shows the active run-time settings for the domain name system (DNS) protocol. The primary and secondary DNS addresses come from the active interface. The static addresses from the Network Interface Configuration page may be overridden by DHCP or BOOTP. The DNS page also shows any contents in the DNS cache.

  • Page 79: Figure 10-2. Snmp Configuration

    10: Services Settings Figure 10-2. SNMP Configuration 2. Enter or modify the following settings: SNMP Page Settings Description SNMP Agent Select On to enable SNMP. Read Community Enter the SNMP read-only community string. Write Community Enter the SNMP read/write community string. System Contact Enter the name of the system contact.

  • Page 80: Ftp Configuration

    10: Services Settings SNMP Page Settings Description during system boot. Primary Trap Dest IP Enter the primary SNMP trap host. Secondary Trap Dest IP Enter the secondary SNMP trap host. 3. Click Submit. 4. In the Current Configuration table, delete and clear currently stored settings as necessary.

  • Page 81: Tftp Configuration

    10: Services Settings 2. Enter or modify the following settings: FTP Page Settings Description FTP Server Select On to enable the FTP server. Username Enter the username to use when logging in via FTP. Password Enter the password to use when logging in via FTP. 3.

  • Page 82: Syslog Configuration

    10: Services Settings 2. Enter or modify the following settings: TFTP Page Settings Description TFTP Server Select On to enable the TFTP server. Allow TFTP File Select whether to allow the creation of new files stored Creation on the TFTP server. 3.

  • Page 83: Http Configuration

    10: Services Settings 2. Enter or modify the following settings: Syslog Page Description Settings Syslog Select to enable or disable the syslog. Host Enter the IP address of the remote server to which system logs are sent for storage. Local Port Enter the number of the local port on the EDS from which system logs are sent.

  • Page 84: Figure 10-6. Http Statistics

    10: Services Settings View HTTP statistics: Click HTTP on the menu bar and then Statistics at the top of the page. The HTTP Statistics page appears. Figure 10-6. HTTP Statistics EDS User Guide...

  • Page 85: Change Http Configuration

    10: Services Settings Change HTTP Configuration On this page you can change HTTP configuration settings. Configure HTTP: 1. Click HTTP on the menu bar and then Configuration at the top of the page. The HTTP Configuration page opens. Figure 10-7. HTTP Configuration 2.
  • Page 86 10: Services Settings HTTP Description Configuration HTTP Port Enter the port for the HTTP server to use. The default is 80. HTTPS Port Enter the port for the HTTPS server to use. The default is 443. The HTTP server only listens on the HTTPS Port when an SSL certificate is configured.

  • Page 87: Http Authentication

    10: Services Settings HTTP Authentication HTTP Authentication enables you to require usernames and passwords to access specific web pages or directories on the EDS's built-in web server. More than one Username per URI is permitted. Click Submit and enter the next Username as necessary.
  • Page 88 10: Services Settings 2. Enter or modify the following settings: HTTP Authentication Description Settings Enter the Uniform Resource Identifier (URI). The URI must begin with ‘/’ to refer to the file system. Realm Enter the domain, or realm, used for HTTP. Required with the URI field.

  • Page 89: Rss Settings

    10: Services Settings RSS Settings EDS devices support RSS feeds with up-to-date information about configuration changes. RSS feeds allow you to view new information about changes made to the EDS over the web. On the RSS Settings page, you can turn RSS feeds on or off. On means the device will create RSS feeds and make them accessible.

  • Page 90: Lpd Settings

    10: Services Settings LPD Settings In addition to its other functions, the EDS acts as a print server if a printer is connected to one of its serial ports. Clicking the LPD (Line Printer Daemon) link in the menu bar, shows a LPD page. This page has three links at the top for viewing print queue statistics, changing print queue configuration, and printing a test page.

  • Page 91: Lpd Configuration Page

    10: Services Settings LPD Configuration Page Here you can change LPD configuration settings. Configure LPD settings: 1. Click LPD on the menu bar, select the LPD line and click Configuration. The LPD Configuration page appears. Figure 10-11. LPD Configuration EDS User Guide...
  • Page 92 10: Services Settings 2. Enter or modify the following settings: Description Configuration Page Settings Banner Select Enabled to print the banner even if the print job does not specify to do so. Selected by default. Binary Select Enabled for the EDS to pass the entire file to the printer unchanged.

  • Page 93: 11: Security Settings

    SSH and SSL are protocols for managing the security of data transmissions over the Internet. SSH Settings Secure Shell (SSH) is a protocol used to access a remote computer over an encrypted channel. It is a protocol for managing the security of data transmission over the Internet.
  • Page 94 11: Security Settings SSH Server: Description Host Keys upload or use the Browse button to select the key. Be sure the private key will not be compromised in transit. This implies the data is uploaded over some kind of secure private network. Public Enter the path and name of the existing public key you want to upload or use the Browse button to select the key.

  • Page 95: Ssh Server Authorized Users

    11: Security Settings SSH Server Authorized Users On the SSH Server page you can change SSH server settings for Authorized Users. SSH Server Authorized Users are accounts on the EDS that can be used to log into the EDS using SSH. For instance, these accounts can be used to SSH into the CLI or open an SSH connection to a device port.

  • Page 96: Ssh Client Known Hosts

    11: Security Settings SSH Server: Description Authorized Users Page Settings you want to use with this user or use the Browse button to select the key. If authentication is successful with the key, no password is required. 3. Click Submit. SSH Client Known Hosts On this page you can change SSH client settings for known hosts.

  • Page 97: Ssh Client User Configuration

    11: Security Settings Note: These settings are not required for communication. They protect against Man-In-The-Middle (MITM) attacks. 3. Click Submit. 4. In the Current Configuration table, delete currently stored settings as necessary. SSH Client User Configuration On this page you can change SSH client settings for users. SSH client known users are used by all applications that play the role of an SSH client, specifically tunneling in Connect Mode.
  • Page 98 11: Security Settings SSH Client: Description Users Page Settings Username Enter the name that the EDS uses to connect to a SSH server. Password Enter the password associated with the username. Remote Enter the command that can be executed remotely. Default is Command shell, which tells the SSH server to execute a remote shell upon connection.

  • Page 99: Ssl Settings

    11: Security Settings SSL Settings Secure Sockets Layer (SSL) is a protocol for managing the security of data transmission over the Internet. It provides encryption, authentication, and message integrity services. SSL is widely used for secure communication to a web server. Certificate/Private key combinations can be obtained from an external Certificate Authority (CA) and downloaded into the unit.
  • Page 100 11: Security Settings 2. Enter or modify the following settings: SSL Page Description Settings Upload Certificate New Certificate This certificate identifies the EDS to peers. It is used for HTTPS and SSL Tunneling. Enter the path and name of the certificate you want to upload, or use the Browse button to select the certificate.
  • Page 101 11: Security Settings SSL Page Description Settings State/Province Enter the state or province to be assigned to the new self-signed certificate. Locality (City) Enter the city or locality to be assigned to the new self- signed certificate. Organization Enter the organization to be associated with the new self- signed certificate.
  • Page 102 11: Security Settings SSL Page Description Settings DSA = Digital Signature Algorithm also based on large prime numbers, but can only be used for signing. Developed by the US government to avoid the patents on RSA. EDS User Guide...

  • Page 103: 12: Maintenance And Diagnostics Settings

    This chapter describes how you can View current file diagnostics or modify files. Configure the EDS network stack protocols. Specify the hosts and subnets permitted to communicate with the EDS. Configure automatic discovery of the device by the DeviceInstaller utility. View or change the current date or time.

  • Page 104: File System Browser

    12: Maintenance and Diagnostics Settings To view file system statistics, compact, or format the EDS file system: 1. Back up all files as necessary. 2. Click Filesystem on the menu bar. The File system page opens and shows the current file system statistics and usage. 3.
  • Page 105 12: Maintenance and Diagnostics Settings 3. Click the X next to a filename to delete the file or directory. You can only delete a directory if it is empty. 4. Enter or modify the following settings: Note: Changes apply to the current directory view. To make changes within other folders, click the folder or directory and then enter the parameters in the settings listed below.

  • Page 106: Protocol Stack Configuration

    12: Maintenance and Diagnostics Settings File system Browser Description Page Settings Port Enter the number of the port involved in TFTP operations. Click Transfer to perform the TFTP transfer. Protocol Stack Configuration Configure the EDS network stack protocols: 1. Click Protocol Stack on the menu bar. The Protocol page appears with links to the TCP, IP, ICMP, and ARP protocols.

  • Page 107: Ip Setting

    12: Maintenance and Diagnostics Settings Ack Limit: The Ack Limit specifies how many packets must be received before an ACK is forced. If there is a large amount of data to acknowledge, an ACK will be forced before this. If the sender TCP implementation waits for an ACK before sending more data even though the window is open, setting Ack Limit to "1"...

  • Page 108: Arp Settings

    12: Maintenance and Diagnostics Settings ARP Settings On the ARP page, you set the maximum time an address remains in the cache, and you specify both the IP and MAC addresses for the ARP cache. Both addresses are required. Figure 12-6. ARP Protocol Page 1.

  • Page 109: Ip Address Filter

    12: Maintenance and Diagnostics Settings IP Address Filter The IP address filter specifies the hosts and subnets permitted to communicate with the EDS. Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list. Configure the IP address filter: 1.

  • Page 110: Query Port

    12: Maintenance and Diagnostics Settings Query Port The query port is used for the automatic discovery of the device by the DeviceInstaller utility. Only 0x77FE discover messages from DeviceInstaller are supported. For more information on DeviceInstaller, see Using DeviceInstaller on page 38.

  • Page 111: Mib-Ii Statistics

    12: Maintenance and Diagnostics Settings Figure 12-9. Diagnostics: Hardware MIB-II Statistics The MIB-II Network Statistics page shows the various SNMP-served Management Information Bases (MIBs) available on the EDS. View EDS MIB-II statistics: 1. Click Diagnostics on the menu bar and then MIB-II at the top of the page menu. The MIB-II Network Statistics page opens.

  • Page 112: Ip Sockets

    12: Maintenance and Diagnostics Settings RFC 2011 Updated definitions for IP and ICMP. RFC 2012 Updated definitions for TCP. RFC 2013 Updated definitions for UDP. RFC 2096 Definitions for IP forwarding. IP Sockets The IP Sockets page opens and shows all of the open network sockets on the EDS. Display open network sockets on the EDS: Click Diagnostics on the menu bar and then IP Sockets.

  • Page 113: Traceroute

    12: Maintenance and Diagnostics Settings Figure 12-12. Diagnostics: Ping 2. Enter or modify the following settings: Diagnostics: Ping Description Page Settings Host Enter the IP address or host name to ping. Count Enter the number of ping packets to send to the Host.

  • Page 114: Dns Lookup

    12: Maintenance and Diagnostics Settings 2. Enter or modify the IP address or DNS hostname. 3. Click Submit. The results of the traceroute appear in the page. DNS Lookup You can specify a DNS Hostname for a forward lookup or an IP address for a reverse lookup.

  • Page 115: Memory

    12: Maintenance and Diagnostics Settings Memory This read-only page shows the total memory and available memory (in bytes), along with the number of fragments, allocated blocks, and memory status. Display memory statistics for the EDS: Click Diagnostics on the menu bar then Memory at the top of the page. The Diagnostics: Memory page appears.

  • Page 116: Figure 12-16. Diagnostics: Buffer Pools

    12: Maintenance and Diagnostics Settings Figure 12-16. Diagnostics: Buffer Pools EDS User Guide...

  • Page 117: Processes

    12: Maintenance and Diagnostics Settings Processes The EDS Processes page shows all the processes currently running on the system. It shows the Process ID (PID), the percentage of total CPU cycles a process used within the last three seconds, the total stack space available, the maximum amount of stack space used by the process since it started, and the process name.
  • Page 118 12: Maintenance and Diagnostics Settings Note: The Adobe SVG plug-in is required to view the CPU Load Graph. EDS User Guide...

  • Page 119: Real Time Clock Page

    12: Maintenance and Diagnostics Settings Real Time Clock Page You can view or change the current date or time configured on the EDS. Figure 12:-18. Real Time Clock Page Real Time Clock Page settings 1. Modify the following settings to set change the current date and time: Real Time Description Clock Page...

  • Page 120: System Configuration

    12: Maintenance and Diagnostics Settings System Configuration You can reboot the device, restore factory defaults, upload new firmware, configure the short and long name, and view the current system configuration. Configure the EDS system settings: 1. Click System on the menu bar. The System page appears. Figure 12-19.

  • Page 121: 13: Advanced Settings

    This chapter presents information for advanced activities, modes, and statistics. Email alerts. CLI settings. CLI servers on Telnet and SSH ports. Export or import an EDS configuration files. Accept Mode. Connect Mode. Disconnect Mode. Packing Mode. Modem Emulation mode. Serial Line Settings. Tunneling Statistics.

  • Page 122: Figure 13-1. Email Statistics

    13: Advanced Settings View email statistics. Click Email from the main menu, then choose an email profile, from the drop down list, e.g. Email 1, then click Statistics. Figure 13-1. Email Statistics To clear the log, click Clear. EDS User Guide...

  • Page 123: Email Configuration

    13: Advanced Settings Email Configuration You can set up to 8 email profiles. Each profile can have multiple email addresses or email address groups, separated by semicolons. Configure EDS email settings: 1. Click Email on the menu bar and then Email n and Configuration at the top of the page.

  • Page 124: Command Line Interface Settings

    13: Advanced Settings To test your configuration, you can send an email immediately by clicking Send Email at the top of the page. Refer to the Statistics page for a log of the transaction. Command Line Interface Settings The Command Line Interface pages enable you to view statistics about the CLI servers listening on the Telnet and SSH ports, and to configure CLI settings.

  • Page 125: Cli Configuration

    13: Advanced Settings CLI Configuration On this page you can change CLI configuration settings. Configure the CLI: 1. Click CLI on the menu then Configuration at the top of the page. The Command Line Interface Configuration page appears. Figure 13-4. Command Line Interface Configuration 2.

  • Page 126: Xml Configuration

    13: Advanced Settings Command Line Description Interface Configuration Settings Sessions SSH Access Select On to enable SSH access. SSH is enabled by default. SSH Port Enter the SSH port to use for SSH access. The default is 22. SSH Max Sessions Maximum number of simultaneous SSH sessions.

  • Page 127: Figure 13-5. Xml: Export Configuration

    13: Advanced Settings Export a system configuration record: 1. Click XML on the menu bar then Export Configuration at the top of the page. Figure 13-5. XML: Export Configuration Enter or modify the following settings: XML Export Description Configuration Page Settings Export to browser Select this option to export the XCR data in the...
  • Page 128 13: Advanced Settings XML Export Description Configuration Page Settings Export secrets Only use this with extreme caution. If selected, secret password and key information will be exported. Use only with a secure link, and save only in secure locations. Lines to Export Select the instances you want to export in the line, LPD, PPP, tunnel, and terminal groups.

  • Page 129: Xml: Export Status

    13: Advanced Settings XML: Export Status You can export the current system status in XML format to a web browser or to a file on the file system. 1. Click XML on menu bar and then Export Status at the top of the page. The XML Status Record: Export Status page appears.

  • Page 130: Xml: Import System Configuration Page

    13: Advanced Settings XML Status Record: Description Export System Status Page Settings Groups to Export Check the configuration groups that are to be exported into the XML status record. 3. Click the Export button. The groups display if exporting the data to the browser. If exporting to the file system, the file is stored on the file system.

  • Page 131: Figure 13-8. Xml: Import Configuration From External File

    13: Advanced Settings Import Configuration from External File This selection shows a field for entering the path and file name of the entire external XCR file to import. You can also browse to select the XCR file. Figure 13-8. XML: Import Configuration from External File Import Configuration from the Filesystem This selection shows a page for entering the file system and your import requirements –...

  • Page 132: Figure 13-9. Xml: Import From Filesystem

    13: Advanced Settings Figure 13-9. XML: Import from Filesystem 1. Enter the filename of the XCR file with the groups to import. 2. Enter or modify the following settings: Import Description Configuration from File system Settings Filename Enter the name of the file on the EDS (local to its file system) that contains XCR data.
  • Page 133 13: Advanced Settings Import Description Configuration from File system Settings Whole Groups to Select the configuration groups to import from the XML Import configuration record. This option imports all instances of each selected group unless it is one of the Lines to Import.

  • Page 134: Figure 13-10. Xml: Import Line(S) From Single Line Settings On The File System

    13: Advanced Settings Import Line(s) from Single Line Settings on the File system This selection copies line settings from the single line instance in the input file to selected lines. The import file may only contain records from a single line instance; this is done by selecting a single Line to Export when exporting the file.
  • Page 135 13: Advanced Settings Import Line(s) Description Settings Lines to Import Select the line(s) of settings to import. Click the Select All link to select all the serial lines and the network lines. Click the Clear All link clear all of the checkboxes. By default, all serial line instances are selected.

  • Page 136: Connect Mode

    Tunneling allows serial devices to communicate over a network, without “being aware” of the devices which establish the network connection between them. Tunneling parameters are configured as described in Tunnel Settings, on page 57—or via the Command Mode Tunnel Menu (see the EDS Command Reference for the full list of commands.) The EDS supports two tunneling connections simultaneously per serial port.

  • Page 137: 14: Tunneling

    14: Tunneling Telnet UDP (Connect Mode only) When setting AES encryption, both the encrypt key and the decrypt key must be specified. The encrypt key is used for data sent out. The decrypt key is used for receiving data. Both of the keys may be set to the same value. For Connect Mode using UDP, the EDS accepts packets from any device on the network.

  • Page 138: Disconnect Mode

    14: Tunneling AES encryption over TCP Telnet (The EDS supports IAC codes. It drops the IAC codes when Telneting and does not forward them to the serial port). Accept Mode has the following states: Disabled (never a connection) Enabled (always listening for a connection) Active if it receives any character from the serial port Active if it receives a specific (configurable) character from the serial port (same start character as Connect Mode’s start character)

  • Page 139: Modem Emulation

    14: Tunneling Trailing Character: If a trailing character is defined, this character is appended to data put on the network immediately following the send character. Modem Emulation The EDS supports Modem Emulation mode for devices that send out modem signals. There are two different modes supported: Command Mode: sends back verbal response codes.

  • Page 140: Serial Line Settings

    14: Tunneling Command Description '+++'. ATEn Switches echo in Command Mode (off - 0, on - 1). Disconnects the network session. Shows modem information. ATQn Quiet mode (0 - enable results code, 1 - disable results code.) ATVn Verbose mode (0 - numeric result codes, 1 - text result codes.) ATXn Command does nothing and returns OK status.

  • Page 141: Statistics

    14: Tunneling The modem control signal DTR on the Line may be continually asserted or asserted only while either an Accept Mode tunnel or a Connect Mode tunnel is connected. Statistics The EDS logs statistics for tunneling. The Dropped statistic shows connections ended by the remote location. The Disconnects statistic shows connections ended by the EDS.

  • Page 142: 15: Security In Detail

    The EDS supports Secure Shell (SSH) and Secure Sockets Layer (SSL). Secure Shell: SSH SSH is a network protocol for securely accessing a remote device. This protocol provides a secure, encrypted communication channel between two hosts over a network. Two roles require configuration: when the EDS acts as the SSH server and when it acts as an SSH client.
  • Page 143 15: Security in Detail 4. Click Submit. Generate and use keys from PuTTY: 1. Create the keys with puttygen.exe. The keys are in PuTTY format. 2. Use puttygen.exe again to convert the private key to Open SSH format as follows: a.

  • Page 144: Ssh Client Configuration

    15: Security in Detail SSH Client Configuration To configure the EDS as an SSH client, there is one requirement: An SSH client must have been configured and exists on the remote SSH server. Configure SSH client settings: 1. Click SSH SSH Client: Users at the top of the page.

  • Page 145: Certificates

    15: Security in Detail EDS currently supports the following list of cipher suites: Certificate Key exchange Encryption Hash 3DES SHA1 128 bits AES SHA1 Triple DES SHA1 128 bits RC4 128 bits RC4 SHA1 1024 bits RSA 56 bits RC4 1024 bits RSA 56 bits RC4 SHA1...

  • Page 146: Utilities

    15: Security in Detail A certificate is also used to sign any message transmitted to the peer to identify the originator and prevent tampering while transported. In short: When using HTTPS, SSL Tunneling in Accept mode, and/or EAP-TLS, the EDS needs a personal certificate with matching private key to identify itself and sign its messages.
  • Page 147 15: Security in Detail Generate a self-signed RSA certificate/key combo: openssl req -x509 -nodes -days 365 -newkey rsa:1024 -keyout mp_key.pem -out mp_cert.pem Steel Belted Radius Steel Belted Radius (SBR) is a commercial radius server by Juniper Networks that provides a GUI administration interface. It also provides a certificate request and self- signed certificate generator.

  • Page 148: 16: Branding The Eds

    The EDS Web Manager and Command Mode (CLI) are customizable. Web Manager Customization Customize the Web Manager’s appearance by modifying index.html and style.css. The style (fonts, colors, and spacing) of the Web Manager are controlled with style.css and the text and graphics are controlled with index.html. The Web Manager files are hidden and incorporated directly into the firmware image but may be overridden by placing the appropriate file in the appropriate directory on the EDS file system.

  • Page 149: Command Mode

    For example: (enable)# show EDS Product Information: Product Type: Lantronix EDS (EDS) Change the EDS short and long names with the Web Manager: 1. Click System in the menu bar. The System page opens. 2. In the Short Name field, enter the new short name for the device (up to 32 characters).

  • Page 150: 17: Updating Firmware Obtaining Firmware

    Obtaining Firmware Obtain the most up-to-date firmware and release notes for the unit from the Lantronix Web site (http://www.lantronix.com/) or by anonymous FTP: (ftp://ftp.lantronix.com/). Loading New Firmware You can reload the firmware using the EDS Web Manager File system page.

  • Page 151: A: Technical Support

    When you report a problem, please provide the following information: Your name, and your company name, address, and phone number Lantronix model number Lantronix serial number Firmware version (on the first screen shown when you Telnet to the device and...

  • Page 152: B: Binary To Hexadecimal Conversions

    Many of the unit’s configuration procedures require you to assemble a series of options (represented as bits) into a complete command (represented as a byte). The resulting binary value must be converted to a hexadecimal representation. Use this chapter to learn to convert binary values to hexadecimals or to look up hexadecimal values in the tables of configuration options.

  • Page 153: Scientific Calculator

    B: Binary to Hexadecimal Conversions Scientific Calculator Another simple way to convert binary to hexadecimal is to use a scientific calculator, such as the one available on the Windows operating systems. For example: 1. On the Windows Start menu, click Programs Accessories Calculator. 2.

  • Page 154: C: Lantronix Cables And Adapters

    Lantronix cables and adapters for use with the EDS devices are listed here according to part number and application. Lantronix Description Applications 500-103 6’ RJ45-to DB9F Included with EDS8/16/32PR for setup or device connectivity. Connects the RJ45 RS232 serial ports of EDS8/16/32PR to a DB9M DTE interface of a PC or serial device.
  • Page 155 C: Lantronix Cables and Adapters Lantronix Description Applications a serial device. 200.2067A Adapter RJ45-to- Allows a standard straight-pinned CAT5 DB25F cable to connect the EDS8/16/32PR RJ45 serial ports to the DB25M DTE interface of a serial device. 200.2069A Adapter RJ45-to-...

  • Page 156: D: Compliance

    The following compliances are according to ISO/IEC Guide 22 and EN 45014. Manufacturer’s Name & Address: Lantronix 15353 Barranca Parkway, Irvine, CA 92618 USA Declares that the following product: Product Name and Model: EDS4100 4 Port Device Server, EDS16PR 16 Port...

  • Page 157: Lithium Battery Notice

    Director of Quality Assurance, Lantronix 15353 Barranca Parkway, Irvine, CA 92618 USA Tel: 949-453-3990 Fax: 949-453-3995 RoHS Notice: All Lantronix products in the following families are China RoHS-compliant and free of the following hazardous substances and elements: Lead (Pb) Mercury (Hg) Polybrominated biphenyls (PBB)

  • Page 158: Installationsanweisungen

    D: Compliance Installationsanweisungen Rackmontage Bei Montage in ein geschlossenes Rack oder in ein Rack mit mehreren Einheiten ist unter Umständen eine weitere Prüfung erforderlich. Folgende Punkte sind zu berücksichtigen. 5. Die Umgebungstemperatur innerhalb des Racks kann höher sein als die Raumtemperatur.

  • Page 159: Grounding

    D: Compliance Grounding Reliable earthing of this equipment must be maintained. Particular attention should be given to supply connections when connecting to power strips, rather than direct connections to the branch circuit strips. EDS User Guide...

  • Page 160: E: Warranty

    For details on the Lantronix warranty replacement policy, go to our web site at http://www.lantronix.com/support/warranty/index.html EDS User Guide...

  • Page 161: Index

    Index Accessing MatchPort b/g Pro, 38 EDS16/32PR Address Features, 16 Ethernet, 20 Hardware components, 23, 34 Hardware, 20 Installation, 25, 36 IP, 20 Overview, 16, 33 MAC, 20 Package contents, 22, 33 ARP Settings, 108 Reset button, 25, 36 Serial ports, 24, 34 User-supplied Items, 22, 33 EDS16/32PS Bar code, 21...
  • Page 162 Reset button Address Filter, 109 EDS16/32PR, 36 Settings, 107 RSA, 146 RSS, 18 RSS Settings, 89 Label, 21 Lantronix Discovery Protocol, 20 LEDs SCPR, 18 EDS16/32PR, 24, 35 Secure Com Port Redirector, 18 EDS4100, 30 Secure Shell, 142 Line 1...
  • Page 163 Index TFTP Configuration, 81 Time settings, 119 Updating Firmware, 150 Troubleshooting Capabilities, 19 Upload Authority Certificate, 100 Tunnel Settings Upload Certificate, 100 Accept Mode, 58 AES Keys, 71 Connect Mode, 64 Web Manager Disconnect Mode, 70 accessing, 41 Modem Emulation, 67 navigating, 44 Packing Mode, 60 page summary, 44...

This manual is also suitable for:

Eds8prEds16prEds4100Eds8psEds16ps

Table of Contents