Bypassing The Interlock Switch And Cover Open Sensor - Epson DFX-5000+ Service Manual

Bypassing the Interlock Switch and Cover Open Sensor

To print with the top cover open or removed, you need to bypass the interlock
switch and cover open sensor because these sensors automatically disable printing
when the top cover is open. To bypass the interlock switch, remove the top cover
and close the left cover hinge.
Interlock Switch
To bypass the cover open sensor, remove the left side cover, disconnect the cable
from connector CN7 on the Cl 17 MAIN board assembly, and jumper pins 1 and 2
of connector CN7.
EPSON DFX-5000+ Service Manual
- - - - - - - - - - - - - -
r - T - - - -
I
I
I
I
,
Shield Plate
Figure 5-2. Bypassing the Interlock Switch
Figure 5-3. Bypassing the Cover Open Sensor
Cover Open Sensor
\ ? ,
Assembly
Troubleshooting
5-3