1-1] Slot-Card Property - Ip Extension-Common Settings - Panasonic KX-TDE100 Programming Manual

3.56 [1-1] Slot—Card Property - IP Extension—Common Settings
3.56 [1-1] Slot—Card Property - IP Extension—
Common Settings
IP-PT network data transmission settings can be programmed. To activate any changes made to settings on
this screen, it is necessary to set all installed IP-EXT cards to OUS, then back to INS.
Gateway Address
Specifies the default gateway address of the network for IP-PTs.
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
3.56 [1-1] Slot—Card Property - IP Extension—Common Settings
Programming Manual References
3.55 [1-1] Slot—Card Property - IP Extension—
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Voice (RTP) UDP Port No. (Server)
Specifies the UDP port used by the IP-EXT card to transmit and receive RTP (Realtime Transfer Protocol)
data. This must be changed if another network application is using the same port.
For voice communications, an IP-EXT card uses 64 contiguous UDP ports, starting from the port number
specified here.
Value Range
1024–65472
Maintenance Console Location
3.56 [1-1] Slot—Card Property - IP Extension—Common Settings
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Voice (RTP) UDP Port No. (IP-PT)
Specifies the UDP port used to transmit and receive RTP (Realtime Transfer Protocol) data on the IP-PT side.
This must be changed if another network application is using the same port.
432 PC Programming Manual
Gateway Address [Common Settings]