Panasonic KX-TDE100 Programming Manual page 569

Send CLIP of CO Caller—when call is transferred to CO (CLIP of held party)
Enables the transfer of related CLIP information when a party on hold is transferred. When set to "Enable", the
transfer destination will receive the original caller's CLIP information, not the information of the extension that
performed the transfer.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Send CLIP of CO Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling party or the CLIP number of the forwarding extension or virtual
PS is sent to the forwarding destination to identify the origin of a trunk call.
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.2.2.3 Outside Destinations in Incoming Call Distribution Group
1.30.6 Network ICD Group
Private Network—Public Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Value Range
0–15
4.18 [2-9] System Options
PC Programming Manual 569