Panasonic KX-TDE100 Programming Manual page 25

Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialise
Connection Settings for LAN
Setting
IP Address
2.1.1 Starting Maintenance Console and Software Modes
Values
COMx
2400, 4800, 9600, 19200,
38400, 57600, 115200
Values
1-9, 0, *, #, -, "," [comma], T, P,
W
Auto(Tone), Auto(Pulse),
Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
Values
1.0.0.0–223.255.255.255
Explanation
Specify the number of the COM port
assigned to the PC's RS-232C
interface. Only available COM ports
are displayed.
Specify the speed of data
transmission.
Explanation
Enter the telephone number to be
dialled to access the PBX.
T: Converts the Dial Type from Pulse
to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialling method.
If Manual is chosen, dialling must be
done with a connected telephone.
Enter a comment to identify the set of
values.
Specify the number of the COM port
assigned to the PC's modem
interface.
Only available COM ports will be
displayed.
Specify the speed of data
transmission.
Enter the modem initialise command,
and click Initialise to send the
command to the modem.
For more details, refer to your
modem's instruction manual.
Explanation
Specify the IP address of the PBX on
the LAN. Enter the same IP address
that was input in IP Address for
IPCMPR Card of 3.4 [1-1] Slot—
Card Property - IPCMPR.
It is also possible to search for the IP
address by clicking Search.
PC Programming Manual 25