Panasonic KX-TDE100 Programming Manual page 963

Feature Guide References
None
Connection
Indicates the port status (reference only).
To change the status of the port, select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
13.6 [11-5] Air Synchronisation
Programming Manual References
5.29 [3-11] Air Synchronisation Group
Feature Guide References
None
Status
Indicates whether a certain CS is registered (reference only).
Value Range
-, Registered
Maintenance Console Location
13.6 [11-5] Air Synchronisation
Programming Manual References
5.29 [3-11] Air Synchronisation Group
Feature Guide References
None
CS Class
Specifies the classification of each CS within the Air Synchronisation Group. This parameter can only be
modified when Connection on this screen is set to OUS.
Value Range
Sync Master CS1, Sync Master CS2, Sync Slave CS
13.6 [11-5] Air Synchronisation
PC Programming Manual 963