10-5] Miscellaneous - Panasonic KX-TDE100 Programming Manual

12.7 [10-5] Miscellaneous

12.7 [10-5] Miscellaneous
The Intercept Routing feature can activate when the destination of an incoming call is unavailable, or when
there is no destination for the call, to reroute the call to an alternate destination.
Intercept—Intercept Routing - DND (Destination sets DND.)
Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.
Value Range
Disable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT or T1 [LCOT/
GCOT] card will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Maintenance Console Location
12.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.6 Intercept Routing
1.3.1.3 Do Not Disturb (DND)
Intercept—Routing to Operator - No Destination (Destination is not
programmed.)
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
(The Intercept Routing—No Destination feature always works for calls through an LCOT or T1 [LCOT/GCOT]
card, even when this feature is disabled.)
Value Range
Disable (Reorder Tone): Sends a reorder tone to the caller
Enable: Redirects the call to an operator
Maintenance Console Location
12.7 [10-5] Miscellaneous
Programming Manual References
None
Feature Guide References
1.1.1.7 Intercept Routing—No Destination
928 PC Programming Manual