Panasonic KX-TDE100 Programming Manual page 840

7.5 [5-3-3] Voice Message—SVM
Programming Manual References
3.1 [1-1] Slot
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
SVM Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone company before
recognising it as a tone-off. When no tone is detected within the time set here, the PBX recognises it as a
tone-off.
Note that this option can only be set when
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the IPCMPR/IPCEMPR card or OPB3 card to "OUS", then "INS". See 3.5 [1-1] Slot—
OPB3 Card Property or 3.58 [1-1] Slot—OPB3 Card Property.
Value Range
20 ´ n (n=6–200) ms
Maintenance Console Location
7.5 [5-3-3] Voice Message—SVM
Programming Manual References
3.1 [1-1] Slot
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
SVM Cyclic Tone Option—Repeating Times of ON/OFF for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to establish
reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when
Value Range
3–16
Maintenance Console Location
7.5 [5-3-3] Voice Message—SVM
Programming Manual References
None
840 PC Programming Manual
SVM Cyclic Tone Detection on this screen is set to "Option".
SVM Cyclic Tone Detection on this screen is set to "Option".