Panasonic KX-TDE100 Programming Manual page 65

3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the Card Test option.
A new window will be displayed.
5.
Click Test to perform the test(s).
The error report will be displayed. When all tests are completed, the words "Test End!" will be shown on
the last line of the output.
6.
Select an option:
•
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Save.
•
Click Cancel to return to the Diagnosis screen.
Pair Port Test
Tests the combination of an extension port and trunk port to ensure that communication with the trunk port can
be carried out successfully.
The pair port test can be carried out using one LCOT or ELCOT card and one DHLC, SLC8, SLC16,
MSLC16, ESLC16, EMSLC16, CSLC16, or ECSLC24 card.
Note
With the KX-TDE600, the pair of cards to be used for the pair port tests must be installed within the same
shelf.
The tests that are performed are as follows:
Line current OFF (Ext->CO)
Line current ON (Ext->CO)
Off hook detection (CO->Ext)
DTMF detection (CO->Ext)
DP detection (CO->Ext)
BELL detection (Ext->CO)
Speech path (Ext->CO)
Speech path (CO->Ext)
To perform a pair port test
1.
From the Utility menu, select Diagnosis.
2.
Click on the Status cell of the extension card to be tested, and set it to "OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the Pair Port Test option.
A new window will be displayed. The card you selected in Step 3 will be shown in the Extension Line Slot
No. drop-down list.
5.
From the CO Line Slot No. drop-down list, select the slot number of the trunk card you want to test.
6.
From the CO Line Port No. drop-down list, select the port number of the trunk you want to test.
7.
Click Test.
The error report will be displayed.
Line current from extension to trunk turns off.
Line current from extension to trunk turns on.
Off-hook generation/detection from trunk to extension
DTMF generation/detection from trunk to extension
DP generation/detection from trunk to extension
BELL generation/detection from extension to trunk
Speech path from extension to trunk
Speech path from trunk to extension
2.6.1 Utility—Diagnosis
PC Programming Manual 65