Panasonic KX-TDE100 Programming Manual page 312

3.35 [1-1] Slot—Port Property - PRI Port
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
3.36 [1-1] Slot—Port Property - PRI Port—Connection Command
Feature Guide References
None
Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
312 PC Programming Manual