Panasonic KX-TDE100 Programming Manual page 851

Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
1.18.1 Caller ID
CO Line Access Number + Telephone Number
Specifies the telephone number (including the Trunk Access number) or feature number assigned to the
System Speed Dialling number.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
1.18.1 Caller ID
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number are
routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number
above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
12.2 [10-2] DIL Table & Port Settings—CLI for DIL—
12.3 [10-3] DDI / DID Table—
Feature Guide References
1.1.1.5 Calling Line Identification (CLI) Distribution
1.18.1 Caller ID
CLI Ring for DDI/DID—Day, Lunch, Break, Night
CLI Ring for DIL—Day, Lunch, Break, Night
8.1 [6-1] System Speed Dial
PC Programming Manual 851