Protocols And Standards; Gvrp Configuration Task List; Configuring Gvrp; Enabling Gvrp - H3C S5500-EI series Operation Manual

Operation Manual – VLAN
H3C S5500-EI Series Ethernet Switches
forbidden registration type thus allows only VLAN 1 to pass through even though it
is configured to carry all VLANs.

3.1.3 Protocols and Standards

GVRP is described in IEEE 802.1Q.

3.2 GVRP Configuration Task List

Note:
GVRP can only be configured on Trunk ports.
Complete the following tasks to configure GVRP:

Enabling GVRP

Configuring GARP Timers

3.3 Configuring GVRP

3.3.1 Enabling GVRP
Follow these steps to enable GVRP on a trunk port:
Enter system view
Enable GVRP globally
Enter
Ethernet
port view
or
port-group
view
Enable GVRP on the
port
Task
To do...
system-view
gvrp
Enter
interface interface-type
Ethernet
interface-number
port view
Enter port port-group { aggregation
group agg-id | manual
view port-group-name }
gvrp
Required
Optional
Use the command...
3-5
Chapter 3 GVRP Configuration
Remarks
Remarks
––
Required
Globally disabled by
default
Use either command.
In Ethernet port view, the
subsequent
configurations only apply
to the current port; in
port group view, the
subsequent
configurations apply to
all ports in the port
group.
Required
Disabled by default