H3C S5500-EI series Operation Manual page 403

Operation Manual – IPv4 Routing
H3C S5500-EI Series Ethernet Switches
Enter system view
Enter interface view
Specify the interval
between hello packets
Specify the number of
hello packets; within the
time for receiving the
specified hello packets, if
no hello packets are
received on the interface,
the neighbor is
considered dead.
Specify the interval for
sending CSNP packets
Specify the interval for
sending LSP packets
Specify the LSP
retransmission interval on
the point-to-point link
To do...
system-view
interface interface-type
interface-number
isis timer hello seconds
[ level-1 | level-2 ]
isis timer
holding-multiplier value
[ level-1 | level-2 ]
isis timer csnp seconds
[ level-1 | level-2 ]
isis timer lsp time
[ count count ]
isis timer retransmit
seconds
Use the command...
4-27
Chapter 4 IS-IS Configuration
Remarks
––
––
Optional
10 seconds by default
Optional
3 by default
Optional
10 seconds by default
Optional
33 milliseconds by default
Optional
5 seconds by default