Table of Contents
Advertisement
19.1
OPTIONAL WAAS GPS RECEIVER SPECIFICATIONS
This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers
accuracy better than three meters by decoding the GPS correction signals from the satellite-
based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics
and the passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color
Dimensions
Weight (without cable)
Cable
Electrical Characteristics
Input Voltage
Input Current
GPS Receiver Sensitivity
GPS Performance
GNSS Systems
Geodetic Datum
Channels
Acquisition Time
Reacquisition
Hot Start
Warm Start
Cold Start
Accuracy
GPS
with SBAS
NMEA Output
Messages
CP590
Ivory white
97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
0,35 lb (160 g)
white 15 meter 8x28AWG cable with 6 pins female connector
10 Vdc to 35 Vdc unregulated
0.8 Wmax
Tracking, Navigation
Acquisition, Reacquisition :-160 dBm
Cold Starts
GPS
GALILEO
SBAS
WGS84
32 + 18
< 1 second
1 second outdoor, 10 seconds indoor
29 seconds
29 seconds
< 2.5m
< 2.0m
GGA, RMC, GSA, GSV, TXT
:-160 dBm
:-145 dBm
: L1 C/A
: L1
: WAAS (North America), EGNOS (Europe), MSAS (Asia),
GAGAN (Indian)
Page 123
Advertisement
Table of Contents
