Hid Tab; Profiles Tab; System Parameters Tab; Miscellaneous Tab - Motorola MC92N0-G User Manual

•
COM23:Bluetooth - Enable or disable COM Port 23.

HID Tab

Use the HID tab to select The Human Interface Device Profile programming interface defines the protocols and
procedures to be used to implement HID capabilities.
Provides support for devices such as mice, joysticks, keyboards.
•
Enable Key Repeat - Enables key repeat functionality.
•
Delay - To increase key repeat delay, drag the Delay slider to the right. To decrease key repeat delay, drag
the Delay slider to the left.
•
Rate - To increase key repeat speed, drag the Rate slider to the left. To decrease key repeat speed, drag the
Rate slider to the right.

Profiles Tab

Use the Profile tab to load or remove Bluetooth services profiles. If a profile is not used, it can be removed to save
memory.
Tap a check box next to the profile to load (activate).
1.
The Serial Port profile is always active and cannot be removed.
Tap Select All to select all profiles or tap Deselect All to deselect all profiles.
2.
Tap Apply to activate the profiles and then Close to exit the application.
3.

System Parameters Tab

•
Page Timeout - Sets the amount of time the MC92N0-G searches for a device before moving on the next
device.
•
Link Supervision Timeout - Sets the amount of time that the MC92N0-G will wait for a device to come back
into range after it has gone out of range. If the device does not come back into range by the set time, the
MC92N0-G drops the connection.

Miscellaneous Tab

•
Highlight Connections - Select the connection type to highlight when connected. In the Wizard Mode, the
only options are Favorites or None. In the Explorer Mode the options are None, Tree View Only, List View
Only, or Tree and List View.
•
Apply Text Style - Select the text style to apply to the connection text.
•
Apply Text Color - Select the text color to apply to the connection text.
Using Bluetooth on Windows Devices 5 - 37