Table of Contents
Advertisement
Shutter speed
1) Shutter speed setting
a) The OPEN command is transmitted and MAIN MENU is opened.
◆
ＭＡＩＮ ＭＥＮＵ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ：AVE
ＡＧＣ
>
ＳＨＵＴＴＥＲ ＳＰＥＥＤ：１／６０
ＳＥＮＳ ＵＰ
Ｂ／Ｗ ＭＯＤＥ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ：ＡＴＷ
ＣＡＭＥＲＡ ＴＩＴＬＥ ：ＯＦＦ
↵
ENHANCE
↵
ＳＵＢ ＭＥＮＵ
ＥＮＤ
Main menu
b) Use the Up and Down buttons to move the cursor [
data flashes. In this state, push the Set button to change the shutter speed as follows.
Set command: 1/60(1/50 PAL)→1/100(1/120 PAL)→1/250→1/500→1/1000→1/2000→1/5000
→1/10000→1/20000→1/50000→1/100000→AES→AES&LENS(1/1000)
→AES&LENS(1/2000)→AES&LENS(1/5000)
Factory setting: 1/60 (1/50)
2) Auto Electric Shutter (AES)
AES is a function to automatically adjust the electronic shutter speed according to the amount of
incident light and keep the image level constant.
Note
a) When using a DC type/VIDEO type auto iris lens, fix the iris to fully open.
b) When the following phenomenon occurs while AES is operating, change to different shutter
speed. The following are not defects.
・Strong smear or blooming occurs in the scene.
・Screen flicker or coloration occurs.
◆(FILE1)
......Scene file setting
↵
......Light control menu
↵
......AGC setting menu
：ＯＮ
......Shutter speed setting
......Sensitivity enhancement Setting
：ＯＦＦ
↵
......Color-B/W mode setting
：ＯＦＦ
↵
......White balance setting
↵
......Camera title menu
......Enhance setting menu
......Sub menu
......End (Menu display off)
] to SHUTTER SPEED. Shutter speed setting
>
31 / 49
Revision A
June 27, 2011
Advertisement
Table of Contents
