Table of Contents
Advertisement
e) When the SET command is transmitted, the set character is sequentially displayed from the left in
the display of camera title character under the screen to which 22 characters is displayed part.
The camera title character display part automatically moves to the right side by one character
whenever the character is set.
NOTE
There is a limitation in the kind of the Kanji character that can be displayed.
The kind of the kanji character that can be displayed is described back. Please refer.
Additional commands of the title input menu are as follows.
SPACE:
Blank (space) character can be selected by matching the blinking cursor to SPACE
and transmitting a set command.
←･→ :
The input characters can be edited by using the arrow symbols.
a) The blinking cursor [
cursor in the camera title character display part moves to the right side. It transmits repeating a
SET command until the blinking cursor comes in succession in the character (position) that
changes. (The cursor moves for ← in the opposite direction to the case of →.)
b) The blinking cursor [
It is character that newly sets the character of the blinking cursor selected by When the SET
command is transmitted, it is 1) revocable.
RESET:
When all characters displayed in the camera title character display part are erased,
it uses it. The blinking cursor [
transmitted. All characters are erased, and the blinking cursor returns to the first
position of the camera title character display part afterwards.
RET:
When the camera title CHARACTER SETTING MENU is ended and it returns to
the MAIN MENU, it uses it. After the blinking cursor is matched to RET, the SET
command is transmitted.
END:
When the menu display is erased and it returns to a usual taking picture screen,
the blinking cursor is matched to END and the SET command is transmitted.
3) Title position setting
POSITION: it is used to decide the display position of the CAMERA TITLE on screen.
a) When the blinking cursor is matched to POSITION and the SET command is transmitted, the
screen is displayed while setting the position of the display of the character of figure.
At BOTTOM, the title setting content is displayed under the screen in the upper part of the screen
when the setting of MODE is TOP.
b) The character set to transmit the UP or DOWN command moves to the left or right. When the
SET command is transmitted after the character is moved to the position in which it wants to
display it, the display position is fixed. It returns to the main, set menu after it fixes it.
Up button
Down button
ＣＡＭＥＲＡ ＮＯ．１
Title position screen (TOP)
] is matched to SPACE and the SET command is transmitted. The blinking
>
] is moved to the character to be displayed by the UP or DOWN command.
>
......Character display position (Top)
......Character display position (Bottom)
] is matched to RESET and the SET command is
>
40 / 49
Revision A
June 27, 2011
Advertisement
Table of Contents
