Hitachi KP-D5010-S1 Operation Manual page 29

Outdoor housing camera
Table of Contents

Advertisement

5) AIE mode setting
AIE is a function to correct brightness of the part that has darkened as a result of over exposure
control by BLC and PEAK/AVE.
a) Use UP or Down commands to move the cursor [
b) The AIE mode cuts when the SET command is transmitted and it changes.
Set command: OFF→LOW→MID→HIGH
OFF:
LOW, MID, HIGH:
Note
The part that has darkened is corrected brightness by the enhancement level increment, but the
picture might be noisy. Therefore, set the enhance level with taking picture conditions.
AGC menu
1) AGC mode setting
a) The OPEN command is transmitted and MAIN MENU is opened.
b) Use UP or Down commands to move the cursor [
c) Under such a condition, when the SET command is transmitted, AGC MENU is displayed.
AGC MENU
>
MODE
:ON
AGC LIMIT
:+31
0・・・・・・・・●・・・・・・51
DNR
:OFF
RET
END
AGC setting menu (ON)
d) When the SET command is transmitted, the AGC mode is changed.
Set command: ON→OFF
ON: Automatically changes the video level within a range of the AGC limit as appropriate
according to the brightness of subject. AGC is set to ON in factory setting.
OFF: Always sets a fixed video level from the [FIX. GAIN].
2) AGC limit setting (AGC ON)
a) Use UP or Down commands to move the cursor [
b) AGC limit gauge cuts in the blinking when the SET command is transmitted and it changes.
c) Under such a condition, the maximum amplification level is set by the UP or DOWN command.
Maximum amplification level AGC LIMIT can be set within the range of 0~+51.
d) Under such a condition, when the SET command is transmitted, a set value is fixed.
The blinking display ends and the cursor moves to DNR.
AIE is inactive. It is set for AIE in factory setting.
AIE is effective. The enhancement level of the part that has darkened is
changed to LOW, MID, HIGH.
......AGC mode display
......AGC lmit (0~+51)
......AGC limit gauge
......Digital Noise Reduction(DNR)display
......Return to Main menu
......End (Menu display off)
29 / 49
] to AIE.
>
] to AGC.
>
] to AGC LIMIT.
>
Revision A
June 27, 2011

Advertisement

Table of Contents
loading

Table of Contents