Hitachi KP-DE500 Operation Manual

Ccd camera
Hide thumbs

Advertisement

Quick Links

CCD Camera
KP-DE500
KP-E500
Operation manual
Before using the camera, please read this operation manual
carefully and keep this manual on file for ready reference in
the future.
Hitachi Kokusai Electric Inc.

Table of contents

CAUTION FOR SAFE OPERATION...............
IMPORTANT NOTICE.................................
General....................................................
Features..................................................
Operating considerations...........................
Section names and functions.....................
Connections.............................................
Lens.........................................................
Recommended lenses..............................
Note on lens selection...............................
Installation of CS-mount lens......................
Lens selector switch.................................
Flange back adjustment............................
Camera mounting......................................
A
Setting menu description..........................
Setting menu composition........................
K
Menu operations.....................................
1
Main Menu.............................................
1
Camera Title Menu..................................
2
Light Control Menu..................................
3
AGC setting...........................................
4
Shutter Speed setting...............................
6
Sensitivity enhance setting........................
7
7
White Balance Menu................................
8
Sub Menu.............................................
8
Remote menu operation............................
9
10
Specifications..........................................
11
Accessories.............................................
Supplied accessories...............................
Optional accessories...............................
12
12
13
13
14
16
19
21
22
23
25
29
32
33
34
34
34

Advertisement

loading

  Also See for Hitachi KP-DE500

  Related Manuals for Hitachi KP-DE500

  Summary of Contents for Hitachi KP-DE500

  • Page 1: Table Of Contents

    CCD Camera KP-DE500 KP-E500 Operation manual Before using the camera, please read this operation manual carefully and keep this manual on file for ready reference in the future. Hitachi Kokusai Electric Inc. Table of contents CAUTION FOR SAFE OPERATION…………... Setting menu description……………………..
  • Page 2: General

    General Features The KP-DE500 is an ultra high sensitivity color camera Ultra high sensitivity that utilizes electron multiplication type Ultra high sensitivity is possible due to the electron (EM-CCD) image sensor. multiplication (EM) CCD which multiplies the charge on the individual pixels before the charge is converted to a...
  • Page 3: Phenomena Inherent To Ccd Image Device

    Phenomena inherent to CCD imaging device Following are the phenomena inherent to a CCD imaging device, and not defects 2) Fixed pattern noise 1) Smear and blooming When the camera is operated in a high temperature, When strong light (lamp, fluorescent lamp, and fixed pattern noise may appear on the entire screen.
  • Page 4: Section Names And Functions

    Section names and functions Tripod adaptor holes See camera mounting Lens mount screws on page 11. See page 10. Lens mount ring See flange back adjustment on page 8. C-mount adaptor Lens connector[LENS] See installation of CS-mount Connect lens cable when lens on page 8.
  • Page 5: Connections

    5C-2V ・・・・ 200m 7C-2V ・・・・ 300m 10C-2V ・・・・ 400m DC input connector KP-DE500 KP-E500 Monitor 1 Monitor 2 Monitor 3 75-ohm coaxial cable Set the 75Ω switch of only the final monitor to on. Set the 75Ω switch of other monitors to off.
  • Page 6: Note On Lens Selection

    Installation of CS-mount lens Note on lens selection C-mount adaptor is provided for the camera in the factory. Observe the maximum size limit (A in the figure) When installing the lens. Internal damage can occur When using a CS-mount lens, unscrew and remove the If a larger lens is used.
  • Page 7: Lens Selector Switch

    Lens connector Lens selector switch When using an auto iris lens, install the lens plug on the lens Cable as indicated in the figures. Refer to the lens instructions Set the switch according to the type of auto-iris lens. Regarding the signals and wire colors. The factory setting is DC.
  • Page 8: Camera Mounting

    Color-B/W selection (page 23 ) (*) ・Gamma White Balance Menu (page 25 ) (*) ・Chroma gain adjustment ・Black reference level adjustment Sub Menu (page 29 ) ・Detail adjustment ・Polarity ・Digital noise reduction (*) Note: Only KP-DE500 ・Burst signal ・Camera reset...
  • Page 9: Menu Operations

    Menu operations Main Menu 1) Press the SET button for at least 2 seconds to display Three rear panel setup buttons are used to shift the cursor and the main menu on the monitor screen. select items from the menus. ◆◆...
  • Page 10: Light Control Menu

    : The input characters can be edited by using the ←・→ Press the UP and DOWN buttons to shift the characters arrow symbols. horizontally. Afterwards, press SET to confirm the display position and return to the main menu. Set the flashing cursor to either of the arrow symbols and Press SET button.
  • Page 11 Setting of BLC NOTE In the case where there is a strong light source and sunlight in The video level adjustment for lenses that use a video the background, the lens iris will close according to the scene signal type lens, is adjusted using the binding screws on brightness, causing the desired object in the scene to appear the side of the lens as shown in the method below.
  • Page 12 Shift the cursor to “PK/AV” and push the SET button, peak / AGC Menu average ratio value changes. As the peak value is enlarged Setting AGC mode It reacts to spot light. Factory setting is “15/85”. Press the SET button for longer than 2 seconds to display SET button : 15/ 85→30/ 70→50/ 50→75/ 25→100/ 0 the “MAIN MENU”.
  • Page 13: Agc Setting

    Auto electronic shutter (AES) Shutter Speed setting This function adjusts the light amount using only the CCD Press the SET button for longer than 2 seconds to display shutter. Use this function with a fixed iris lens. the “MAIN MENU”. Use the UP and DOWN buttons to shift the cursor to NOTE “SHUTTER SPEED”...
  • Page 14: Raising Sensitivity By Color-B/W Selection

    NOTE Raising sensitivity by color-B/W selection Enhanced sensitivity can cause blurring of moving [Only KP-DE500 type] images. In the following types of cases, reduce the sensitivity Press the SET button for longer than 2 seconds to display multiple. the “MAIN MENU”.
  • Page 15: White Balance Menu

    ・ATW (auto tracking white balance) White Balance Menu [Only KP-DE500 type] Ordinarily use this mode, which is suitable for lighting color temperature from 2,500K to 8,000K. Setting White Balance mode Press the SET button for longer than 2 seconds to display Setting ATW Range (Color temperature flattery range) the “MAIN MENU”.
  • Page 16 The cursor moves to “R-GAIN OFFSET” when the automatic ・AWC (preset white balance) setting is completed. The time required in the automatic After white balance condition is set, it is automatically stored in setting changes depending on the light condition. If the memory.
  • Page 17: Sub Menu

    “DETAIL”, then press the SET button. The adjustment value SUB MENU (ITEM: PICTURE) at the right of value flashes. ・CHROMA [Only KP-DE500 Type] Change the “DETAIL” by pressing the UP and DOWN The optimum color level has been set at the factory. If necessary, buttons.
  • Page 18 ・POLARITY ・BURST [Only KP-DE500 type] Use the UP and DOWN buttons to shift the cursor to Burst signal ON/OFF when a monochrome image is output is set. “POLARITY”. Use the UP and DOWN buttons to shift the cursor to Press the SET button to shift the mode in the sequence “BURST”.
  • Page 19: Remote Menu Operation

    12. Electronic shutter speeds Ver. 59.94Hz Selectable in 7 steps & AES internal ( Factory setting is 1/60 ) 5.Sync system KP-DE500:VBS1.0Vp-p/75Ω 1/60,1/100,1/125,1/250,1/500,1/1000,1/2000 6. Video signal output KP-E500:VS1.0Vp-p/75Ω AES:From 1/60 second to 1/2000 second Digital processing ( input 10 bits ) 13.
  • Page 20: Accessories

    Accessories Selectable in 3 modes 16. White balance Supplied accessories Only KP-DE500 (Factory setting is ATW) (color) Auto-tracking[ATW] / preset[AWC] / Operation manual R/B gain manual control[MANUAL] DC input plug (R03-P3F) 22 characters (number, alphabet, and mark) 17. Text display Selectable in 3 modes (Factory setting is OFF) 18.

This manual is also suitable for:

Kp-e500