Table of Contents
Advertisement
Light control menu
The method of the AE (Auto-Iris, AGC, Sens-UP-Auto) function is set with LIGHT CONTROL.
1) Light control mode setting
a) The OPEN command is transmitted and MAIN MENU is opened.
b) Use UP or Down commands to move the cursor [
c) Under such a condition, when the SET command is transmitted, LIGHT CONTROL MENU is
displayed.
◆
ＬＩＧＨＴ ＣＯＮＴＲＯＬ ＭＥＮＵ
>
ＭＯＤＥ
：ＡＶＥＲＡＧＥ
ＬＥＶＥＬ
： ０００
ＡＩＥ
: ＯFF
ＲＥＴ
ＥＮＤ
Light control menu [AVERAGE]
d) When the cursor [
Set command：AVERAGE→BLC→PEAK/AVE
AVE (Average mode)
This mode measures the average luminance of the entire screen and controls the exposure level.
This is default mode.
BLC (Back Light Control mode)
This mode controls the exposure level at the luminance level of the specified area. (It can be
selected from 9 areas).
PK/AVE (Peak/Average mode)
This mode uses the peak luminance together with average and controls the exposure level. (The
ratio of peak level and average level can be changed.)
2) Video level adjustment
The optimum video level is to factory setting (000). If necessary, the level can be changed as
foIIows.
a) Use UP or Down commands to move the cursor [
◆
ＬＩＧＨＴ ＣＯＮＴＲＯＬ ＭＥＮＵ
>
ＭＯＤＥ
：ＡＶＥＲＡＧＥ
ＬＥＶＥＬ
： ０００
ＡＩＥ
: ＯFF
ＲＥＴ
ＥＮＤ
Light control menu [AVERAGE]
b) The adjusted value changes into the blinking if the SET command is transmitted.
c) The adjusted value is changed when the UP or DOWN command is transmitted at this time and
the
cutting change video level is changed.
Adjustment value range : -128~000~+127
◆
......Light control mode display
......Video level adjustment(-128～000～+127）
↑
......AIE mode
......Return to Main menu
......End (Menu display off）
] is at MODE, in this state, MODE is changed by the SET command.
>
◆
......Light control mode display
......Video level adjustment(-128～000～+127）
↑
......AIE mode
......Return to Main menu
......End (Menu display off）
] to LIGHT CONTROL.
>
] to LEVEL.
>
26 / 49
Revision A
June 27, 2011
Advertisement
Table of Contents
