Hitachi KP-D5010-S1 Operation Manual page 41

Enhancement menu (ENHANCE)
ENHANCE MENU is used to modify the picture quality of camera output.
a) The OPEN command is transmitted and MAIN MENU is opened.
b) When the cursor [
command is transmitted, ENHANCE MENU is displayed.
◆ ENHANCE ＭＥＮＵ ◆
>
ＣＨＲＯＭＡ ： ０００
ＤＥＴＡＩＬ ： ０００ ↑
ＰＥＤＥＳＴＡＬ ： ０００ ↑
ＧＡＭＭＡ ：ＯＮ ↑
ＰＯＬＡＲＩＴＹ ：ＰＯＳＩＴＩＶＥ
ＭＩＲＲＯＲ ：ＯＮ
ＦＯＧ ＡＤＪＵＳＴ ：ＯＦＦ
D-ZOOM ：ＯＦＦ
ＲＥＴ
ＥＮＤ
ENHANCE menu
1) Color level adjustment (CHROMA)
a) It is set to the best color level value when shipping it, and the color level changes to change the
color level if the cursor [
command is transmitted.
Adjustment value range: -128 ～ 000 ～ +50
b) It returns to initialization (000) when the UP&DOWN command is transmitted. Blinking stops if
the SET command is transmitted with the numerical value has blinked and a set value is fixed.
Note
Color noise might be there, when color level is increased too much.
In case of black and white picture mode of BW MODE, the CHROMA level can not be fixed
to -128.
2) Detail setting (DETAIL)
a) It is set to the best amount of an outline correction when shipping it, and a right set value blinks to
change when the cursor [
command is transmitted.
Adjustment value range: -128 ～ 000 ～ +128
b) It returns to initialization (000) when the UP&DOWN command is transmitted. Blinking stops if the
SET command is transmitted with the numerical value has blinked and a set value is fixed.
Note
Noise might be there, when detail level is increased too much.
] is matched to ENHANCE by the UP or DOWN command and the SET
>
......Color level adjustemnt
......Detail adjustment
......Black level adjustment
......Gamma setting
......Picture polarity(negative positive)
......Left and right reverse display
↵
......Fog adjustment
↵
......Digital zoom menu
......Return to Main menu
......End(Menu display off）
] is moved to CHROMA by the UP or DOWN command and the SET
>
] is moved to DETAIL by the UP or DOWN command and the SET
>
41 / 49
Revision A June 27, 2011