Hitachi KP-F500GV Specifications

Hitachi KP-F500GV Specifications

Gigabit ethernet progressive scan ccd camera
Hide thumbs Also See for KP-F500GV:

Advertisement

Quick Links

1
A
1. General
The KP-F500GV is single CCD type camera which utilized the progressive scan CCD image
sensor with square pixel for VGA format of 2/3-inch.
By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be
B
possible. Moreover, by using hub or switcher, construction of multiple camera system can be
easily performed.
2. Outstanding features
(1) High resolution
The 2/3-inch 5,050,000 pixels square lattice progressive scan CCD achieve a high resolution of
2456(H) x 2058(V).
(2) Gigabit Ethernet interface
C
High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to
PC by the diameter cable of thin as compared with parallel output. It is possible to 100m.
(3) GigE Vision (Ver 1.00) correspondence
Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed
data transmit is available and suitable for image processing.
(4) GENiCAM (Ver. 1.00) correspondence
Development of camera control system is easy because industrial camera control API
"GENiCAM" lead EMVA (European Machine Vision Association).
D
(5) PoE correspondence
Power supply can be input via Ethernet cable (Power over Ethernet).
(6) Remote control
- Multi-step electronic shutter (from 1/16 to 1/50000 second in 8 steps)
- Variable shutter (from 10 to 1/100000 second)
- The image capture at desired timing using the external trigger signal
and other various functions are set by remote control via a Gigabit Ethernet cable.
E
-
May.31,2008
SYMBOL
DATE
KP-F500GV
MODEL
DESIGNED
DATE
F
CHECKED
DATE
1
2
Gigabit Ethernet
Progressive scan CCD camera
KP-F500GV
Specifications (Preliminary) Ver.1.00
TOLERANCE
APPROVED
DATE
UNIT
STORED
DATE
SCALE
2
3
(first edition)
DESCRIPTION
Prod. Code - Order No.
KP-F500GV
TITLE
Specifications
DWG.
No.
3
4
(DRAWN)
DESIGNED
REV.
0 0
SHEET
1
9
4
D F 0 2 2 - 4 P E - T 1
A
B
C
D
E
F

Advertisement

Table of Contents
loading

Summary of Contents for Hitachi KP-F500GV

  • Page 1 Specifications (Preliminary) Ver.1.00 1. General The KP-F500GV is single CCD type camera which utilized the progressive scan CCD image sensor with square pixel for VGA format of 2/3-inch. By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible.
  • Page 2: Specifications

    3. Specifications (1) Imaging device 2/3-inch progressive scan interline CCD Total pixels 2536 (H) x 2068 (V) Effective pixels 2456 (H) x 2058 (V) Pixel size 3.45 um (H) x 3.45 um (V) (square lattice) (2) Scanning area 8.47 mm (H) x 7.10 mm (V) (3) Scanning system Progressive (4) Aspect ratio...
  • Page 3 (14) External sync signal VD output 5Vp-p +/- 0.3V Strobe out 5Vp-p +/- 0.3V Output Polarity High / Low adjustable Strobe delay Adjustable Strobe duration Adjustable (15) Partial scan Selectable start position and width of picture grabbing in 1H step. (16) ALC (Auto level control) Adjustable for video level (17) Gain Auto / Manual (0dB to 18db)
  • Page 4: Optional Accessories

    4. Composition (1) Camera (with IR cut filter) (2) CD-ROM (Operation manual, Control software and SDK) (3) Composition table 5. Optional accessories (1) Dummy glass (AR coated) ARC1214 (2) IR cut filter IRC650 (3) Junction box JU-F30, (4) Tripod adaptor TA-M1 (5) 12pin plug HR10A-10P-12S(01)
  • Page 5 6. Specification of Digital output connector (1) Gigabit Ethernet connector LED1 LED2 PIN NO. Signal TRP1+ TPR1- TRP2+ TPR3+ TRP3- TRP2- TRP4+ TRP4- Connector: RJ-45 *LED Status STATUS LED1(Green) LED2 (Yellow) Power ON Light Off Light On Transmission Blink On Light On Transmission pause Light Off...
  • Page 6: Spectral Response

    9. Spectral response IR cut filter 1000 Wave Length (nm) SHEET DWG. D F 0 2 2 - 4 P E - S 1...
  • Page 7: External View

    10. External view 13 L E U N A M R I O V E C R E P A L A U N A M   E E S SER.NO. RATED PLATE U1 25 26 (φ27.4) 26 29 14.5 SHEET DWG.
  • Page 8 (4) Compensation for loss of business, loss or damage to software, database and other contingent losses are beyond the scope of this Warranty. (5) Hitachi Kokusai Electric Inc. is not liable for the losses caused when the equipment is used in a system, use for business trades, production process, medical fields, crime prevention applications, etc.
  • Page 9: Modification History

    Modification history SIMBLE DATE CORRECTION AND REASONS DESIGNED SHEET DWG. D F 0 2 2 - 4 P E - S 1...

Table of Contents