Table of Contents
Advertisement
3) Moire
When group of fine strips or stripped pattern is captured, additional stripped pattern (interference
inducted strips) which is not real might be seen on the monitor screen.
●It is necessary to note the following phenomenon specially.
4) Burning
When sun light or extremely strong light enters for a long time, the characteristics of the spectral
filter (color filter) of CCD image sensor might be deteriorated and the color of the corresponding
portion may change. Do not set or keep lens or CCD towards sun or extremely strong light
direction in either power on or off state.
5) White spot
Imperceptible white spots may rarely come up on the screen due to cosmic rays and so on. It
becomes easy to appear when the sensitivity of the camera is raised in the operation at the high
temperature.
4. Name and function of each section
Air stopgap screw
M6×10SUS
Refer to page 9 (A method of enclosing Nitrogen gas).
[Side view]
A lid of adjusting lens iris
（H55ZAME-5F・PENTAX）
6 / 49
Revision A
June 27, 2011
Advertisement
Table of Contents
