Download Print this page

Hitachi KP-DE500 Specification

High sensitivity color camera / high sensitivity black and white camera
Hide thumbs

Advertisement

Quick Links

High sensitivity color camera /
High sensitivity black and white camera
KP - DE500 /KP - E500
High sensitivity color camera KP-DE500
100 Times More Sensitive Than A Normal Camera
A new 1/2 inch EM-CCD with electron multiplication is used to achieve exceptional sensitivity.
Color in full motion mode
Color accumulation mode
Monochrome in full motion mode
Monochrome accumulation mode 0.0000008 lx
Hitachi Technology Enables Superior Image Reproduction In Low Light Levels
Thermoelectric cooling used on the EM-CCD to reduce the effects of dark current noise along with
a new digital signal processor (DSP) that provides digital noise reduction of the luminous signal yields
sharp clear pictures with a high S/N ratio.
High sensitivity monochrome camera KP-E500
For Even Greater Sensitivity A Monochrome Version of the Camera is Available Allowing
Use in Even Lower Light Levels
In the normal mode of operation the camera provides higher
sensitivity as compared to a normal camera. In the accumulation
mode unmatched sensitivity is achieved allowing use in extremely
low light situations.
Monochrome in full motion mode
Monochrome accumulation mode 0.0000005 lx
Electron Multiplication used in the EM-CCD Improves
Performance While Reducing Technical Issues
Typical high sensitivity cameras use an Image Intensifier Tube
that is subject to burn in, afterimage (lag) and short life span.
These problems are eliminated with the use of the EM-CCD.
0.0009 lx
0.000015 lx
0.00005 lx
0.00003 lx
Image by ordinary camera
Image by KP-DE500
100 to 1000 times more sensitive than
conventional cameras

Advertisement

loading

  Also See for Hitachi KP-DE500

  Related Manuals for Hitachi KP-DE500

  Summary of Contents for Hitachi KP-DE500

  • Page 1 0.00005 lx Monochrome accumulation mode 0.0000008 lx Hitachi Technology Enables Superior Image Reproduction In Low Light Levels Thermoelectric cooling used on the EM-CCD to reduce the effects of dark current noise along with a new digital signal processor (DSP) that provides digital noise reduction of the luminous signal yields sharp clear pictures with a high S/N ratio.
  • Page 2: Main Specifications

    White balance control From the following three modes to selection ( factory set-ATW ) 6.58 ( H ) x 4.89 ( V ) mm *Only KP-DE500 ( color ) Imaging area ATW : The mode which follows automatically 10.0 ( H ) x 10.0 ( V ) µm ( Square pixel )

This manual is also suitable for:

Kp-e500