Table of Contents
Advertisement
2) Lens Open setting
When the back focus is adjusted, this function is used.
The setting cuts as follows when the cursor is matched to LENS OPEN by the UP or DOWN
command, and the SET command is transmitted and it changes.
Set command: OFF→ON (Lens Open)
3) Return to camera factory setting (CAMERA RESET)
It returns to the state when various settings of the camera ship all factories when the cursor [
is matched to CAM-RESET and the UP&DOWN command is transmitted. It returns to the MAIN
MENU after it ends. Please see the explanation of each item in the factory default setting of each
setting.
45 / 49
Revision A
June 27, 2011
]
>
Advertisement
Table of Contents
